Shigeru HAMADA
机构: Department of Mechanical Engineering, Faculty of Engineering, Kyushu University
每年引用次数
引用次数
引用: 880
H-指数: 15
I10-指数 : 32
出版物: 126
Effect of Hydrogen on the Tensile Properties of Metals
Shigeru Hamada
Green Energy and Technology 403 -410
2016
Effect of Friction Stir Welding Condition on Fatigue Limit of Welded Non-Combustible Mg Alloy
Komei Hayashi , Shigeru Hamada , Ichinori Shigematsu , Michiru Sakamoto
Key Engineering Materials 488-489 311 -314
2011
Fatigue Limit Reliability Analysis for Notched Material with Some Kinds of Dense Inhomogeneities Using Fracture Mechanics
Tatsujiro Miyazaki , Shigeru Hamada , Hiroshi Noguchi
IntechOpen
2019
Visualization and mechanical strength of glass seal in planar type solid oxide fuel cells
Yuto Wakita , Yuya Tachikawa , Hironori Nakajima , Shigeru Hamada
International Journal of Hydrogen Energy 45 ( 41) 21754 -21766
6
2020
Strain mapping with high spatial resolution across a wide observation range by digital image correlation on plastic replicas
Shigeru Hamada , Tomoya Fujisawa , Motomichi Koyama , Norimitsu Koga
Materials Characterization 98 140 -146
14
2014
Shallow crack effect on evaluation of residual tensile strength: Harmless and stable cracks in finite-sized structure made of ductile metals
He Liu , Shigeru Hamada , Motomichi Koyama , Hiroshi Noguchi
Theoretical and Applied Fracture Mechanics 109 102734
1
2020
Fatigue characteristics of a notched specimen made of commercially-pure titanium
Shigeru Hamada , Hiroshi Noguchi
Theoretical and Applied Fracture Mechanics 109 102764
2
2020
Plastic strain distribution throughout the microstructure duality during the fracture process of non-combustible Mg products fabricated by selective laser melting
Bryan Proaño , Hirofumi Miyahara , Toshiharu Matsumoto , Shigeru Hamada
Theoretical and Applied Fracture Mechanics 110 102805
2020
Material property controlling non-propagating fatigue crack length of mechanically and physically short-crack based on Dugdale-model analysis
Naoki Fukumura , Bochuan Li , Motomichi Koyama , Tomohiro Suzuki
Theoretical and Applied Fracture Mechanics 90 193 -202
3
2017
Weakest region analysis of non-combustible Mg products fabricated by selective laser melting
Bryan Proaño , Hirofumi Miyahara , Toshiharu Matsumoto , Shigeru Hamada
Theoretical and Applied Fracture Mechanics 103 102291
3
2019
Effect analysis of stress-intensity-factor-range decreasing rate for obtaining threshold stress-intensity-factor-range
Bochuan Li , Motomichi Koyama , Shigeru Hamada , Hiroshi Noguchi
Theoretical and Applied Fracture Mechanics 104 102377
2019
Mode I fatigue crack growth induced by strain-aging in precipitation-hardened aluminum alloys
Samsol Faizal Anis , Motomichi Koyama , Shigeru Hamada , Hiroshi Noguchi
Theoretical and Applied Fracture Mechanics 104 102340
8
2019
Fundamental criterion Ktrans for failure analysis of hydrogen-assisted cracks in notched specimens of pure Ni
Tingshu Chen , Motomichi Koyama , Shigeru Hamada , Hiroshi Noguchi
Theoretical and Applied Fracture Mechanics 107 102556
2020
Distinguishing geometric and metallurgic hydrogen-embrittlement susceptibilities in pre-cracked structures made of interstitial-free steel under monotonic tension
He Liu , Shigeru Hamada , Motomichi Koyama , Hiroshi Noguchi
Theoretical and Applied Fracture Mechanics 108 102574
2020
Equivalence between shallow notch and shallow crack in structural failure caused by plastic instability
He Liu , Shigeru Hamada , Motomichi Koyama , Hiroshi Noguchi
Theoretical and Applied Fracture Mechanics 108 102577
2
2020
Simplified stress field determination for an inclined crack and interaction between two cracks under tension
Samsol Faizal Anis , Motomichi Koyama , Shigeru Hamada , Hiroshi Noguchi
Theoretical and Applied Fracture Mechanics 107 102561
2
2020
Influence of dynamic-strain aging due to excess Mg on fatigue crack growth rate scatter in Al6061-T6 alloy
Samsol Faizal Anis , Motomichi Koyama , Shigeru Hamada , Hiroshi Noguchi
Theoretical and Applied Fracture Mechanics 108 102617
2020
Particle Impact Damage in Silicon Carbide
A. Suzuki , T. Natsumara , Sumio Sugiyama , T. Teramae
Key Engineering Materials 167 -172
1991
Multiple damage mechanisms facilitated by planar dislocation glide in a commercial-grade precipitation-strengthened Fe-Ni-Cr-based steel
Virendra Kumar Verma , Motomichi Koyama , Shigeru Hamada , Eiji Akiyama
Materials Science and Engineering A-structural Materials Properties Microstructure and Processing 782 139250
3
2020
Simple calculation method for stress concentration and stress intensity of T-shaped member
Shigeru Hamada , Mitsuji Ueda , Komei Hayashi , Hiroshi Noguchi
International Journal of Mechanical Sciences 75 ( 75) 8 -15
3
2013