Photoluminescence Spectra and Crystallization of θ-Al2O3 and α-Al2O3 from AlOOH-Fe(NO3)3 Gels

J. Kákoš , L′. Bača , P. Veis , L. Pach
Journal of Sol-Gel Science and Technology 21 ( 3) 167 -172

20
2001
Crystallization and Porosity Evolution of AlOOH–Fe(NO 3 ) 3 Gels

L. Pach , L'. Bača , Z. Holková , J. Plewa
Journal of Porous Materials 9 ( 1) 17 -24

2002
Polyvinylpyrrolidone thin film pyrolysis as accessed by the real-time optical transmission measurements

Jan Majling , Luboš Bača , Jana Kozánková , Miroslav Kocifaj
Journal of Thermal Analysis and Calorimetry 114 ( 1) 417 -422

1
2013
Przygotowanie lekkich pianobetonów o gęstości pozornej mniejszej niż 200 kg·m-3

E. Kuzielová , L. Pach , L. Bača , M. Žemlička
Cement Wapno Beton

2018
Preparation and investigation of Er 3+ /Yb 3+ co-doped La 2 Zr 2 O 7 ceramic.

E. Trusova , M. Janek , Ľ. Bača , P. Veteška
Хімічні проблеми сьогодення 271

2018
Adapting of sol–gel process for preparation of TiB2 powder from low-cost precursors

Ľ. Bača , N. Stelzer
Journal of The European Ceramic Society 28 ( 5) 907 -911

72
2008
Fracture and mechanical properties of lightweight alumina ceramics prepared by fused filament fabrication

M. Orlovská , Z. Chlup , Ľ. Bača , M. Janek
Journal of The European Ceramic Society 40 ( 14) 4837 -4843

4
2020
Influence of sintering temperature, SiC particle size and Y2O3 addition on the densification, microstructure and oxidation resistance of ZrB2–SiC ceramics

Z. Kováčová , Ľ. Bača , E. Neubauer , M. Kitzmantel
Journal of The European Ceramic Society 36 ( 12) 3041 -3049

39
2016
CHALLENGES FOR XXL COMPONENTS BY POWDER AND WIRE METAL DEPOSITION–4M SYSTEM

MICHAEL KITZMANTEL , LILLA VÁLY , DAVID GRECH , ERICH NEUBAUER

STUDY OF CRYSTALLISATION OF Al2O3-Fe2O3 GELS BY MÖSSBAUER SPECTROSCOPY

ĽUBOŠ BAČA , Jozef Lipka , Ignac Toth , Ladislav Pach
Ceramics− Silikáty 45 ( 1) 9 -14

6
2001
PREPARATION OF TRANSLUCENT YAG CERAMICS USING WET CONSOLIDATION TECHNIQUES

K GHILLÁNYOVÁ , P ŠAJGALÍK , M MICHÁLKOVÁ , D GALUSEK

Novel composite filament usable in low-cost 3D printers for fabrication of complex ceramic shapes

Marián Janek , Katarína Tomanová , Ľuboš Bača , Peter Veteška
Applied Materials Today 22 100949

1
2021
Phase, microstructure evolution and sintering of Sr-doped TiB2 precursors

Ľuboš Bača , Zoltán Lenčéš , Nils Stelzer
Journal of The European Ceramic Society 31 ( 8) 1465 -1471

3
2011
Microstructure evolution and tribological properties of TiB2/Ni–Ta cermets

Ľuboš Bača , Zoltán Lenčéš , Christian Jogl , Erich Neubauer
Journal of The European Ceramic Society 32 ( 9) 1941 -1948

12
2012
Low-temperature consolidation of high-strength TiB2 ceramic composites via grain-boundary engineering using Ni-W alloy

Zdeněk Chlup , Ľuboš Bača , Hynek Hadraba , Ivo Kuběna
Materials Science and Engineering A-structural Materials Properties Microstructure and Processing 738 194 -202

2018
Synthesis and reaction sintering of YB4 ceramics

Zuzana Kováčová , Ľuboš Bača , Erich Neubauer , Ľubomír Orovčík
Ceramics International 45 ( 15) 18795 -18802

2
2019
Mechanical testing of hydroxyapatite filaments for tissue scaffolds preparation by fused deposition of ceramics

Marian Janek , Veronika Žilinská , Vladimír Kovár , Zora Hajdúchová
Journal of The European Ceramic Society 40 ( 14) 4932 -4938

2020
The effect of YB4 addition in ZrB2-SiC composites on the mechanical properties and oxidation performance tested up to 2000 °C

Zuzana Kováčová , Ľubomír Orovčík , Jaroslav Sedláček , Ľuboš Bača
Journal of The European Ceramic Society 40 ( 12) 3829 -3843

1
2020
INFLUENCE OF METALLIC DOPANTS ON FRACTURE BEHAVIOUR OF TIB2 BASED CERMETS

Zdeněk Chlup , Ľuboš Bača , Martina Halasová , Pavol Šajgalík
Acta Metallurgica Slovaca - Conference 3 98 -105

1
2013
Effect of metallic dopants on the microstructure and mechanical properties of TiB2

Zdeněk Chlup , Ľuboš Bača , Martina Halasová , Erich Neubauer
Journal of the European Ceramic Society 35 ( 10) 2745 -2754

29
2015