引用次数
引用: 3,071
H-指数: 25
I10-指数 : 39
出版物: 117
A Closed Form Solution for Flow During the Vacuum Assisted Resin Transfer Molding Process
K-T. Hsiao , R. Mathur , S. G. Advani , J. W. Gillespie,
Journal of Manufacturing Science and Engineering-transactions of The Asme 122 ( 3) 463 -475
76
2000
Manufacturing techniques for polymer matrix composites (PMCs)
Suresh G. Advani , Kuang-Ting Hsaio
Woodhead Publishing Limited
231
2012
First Year Engineering Retention
Gail D Jefferson , Sally Steadman , Tom G Thomas , Kuang-Ting Hsaio
2014
RTM And VARTM Design, Optimization, And Control With SLIC
Kuang-Ting Hsiao
2003
Transport Phenomena in Liquid Composites Molding Processes and their Roles in Process Control and Optimization
Kuang-Ting Hsiao , Suresh G. Advani
CRC Press 591 -624
4
2005
Impacting First-Year Engineering Retention
Gail D. Jefferson , Tom G. Thomas , Kuang-Ting Hsiao , Sally J. Steadman
2014 ASEE Annual Conference & Exposition
2014
First-Year Engineering Summer Session
Gail D. Jefferson , Tom G. Thomas , Kuang-Ting Hsiao , Sally J. Steadman
2014 ASEE Annual Conference & Exposition
2014
Novel Program for Engineering Student Retention
Gail D. Jefferson , Tom G Thomas , Kuang-Ting Hsiao , Sally J. Steadman
2013 ASEE Annual Conference & Exposition
3
2013
MECHANICAL BEHAVIOR MODELING OF UNIDIRECTIONAL CARBON FIBER REINFORCED POLYMER COMPOSITES REINFORCED WITH Z-DIRECTIONAL NANOFIBERS
Kuang-Ting Hsiao , Fariborz Bayat
International SAMPE Symposium and Exhibition
2018
Effects of Carbon Nanofiber Z-Threads on the Longitudinal Compressive Strength of Unidirectional CFRP Laminates
Sebastian Kirmse , Keonhyeong Kim , Bikash Ranabhat , Kuang-Ting Hsiao
SAMPE 2019 - Charlotte, NC
1
2019
A Coupled Approach to Predict Microscopic Temperature Distribution Inside a Unit Cell of Nonisothermal Laminar Flow in Periodic Porous Media
Kuang-Ting Hsiao , Suresh G. Advani
Journal of Porous Media 5 ( 2) 17
12
2002
Enhancement of Through-Thickness Thermal Transport in Unidirectional Carbon Fiber Reinforced Plastic Laminates due to the Synergetic Role of Carbon Nanofiber Z-Threads
Alexander M. Scruggs , Sebastian Kirmse , Kuang-Ting Hsiao
Journal of Nanomaterials 2019 1 -13
2
2019
Flow sensing and control strategies to address race-tracking disturbances in resin transfer molding—part II: automation and validation
Mathieu Devillard , Kuang-Ting Hsiao , Suresh G. Advani
Composites Part A-applied Science and Manufacturing 36 ( 11) 1581 -1589
43
2005
Flow sensing and control strategies to address race-tracking disturbances in resin transfer molding. Part I: design and algorithm development
Kuang-Ting Hsiao , Suresh G. Advani
Composites Part A-applied Science and Manufacturing 35 ( 10) 1149 -1159
46
2004
A study of direct cure kinetics characterization during liquid composite molding
Kuang-Ting Hsiao , Rex Little , Omar Restrepo , Bob Minaie
Composites Part A-applied Science and Manufacturing 37 ( 6) 925 -933
46
2006
Manufacturing carbon nanofibers toughened polyester/glass fiber composites using vacuum assisted resin transfer molding for enhancing the mode-I delamination resistance
Ramin Sadeghian , Sudhir Gangireddy , Bob Minaie , Kuang-Ting Hsiao
Composites Part A-applied Science and Manufacturing 37 ( 10) 1787 -1795
151
2006
Development of adaptive injection flow rate and pressure control algorithms for resin transfer molding
Omar Restrepo , Kuang-Ting Hsiao , Alejandro Rodriguez , Bob Minaie
Composites Part A-applied Science and Manufacturing 38 ( 6) 1547 -1568
23
2007
Investigation on the spring-in phenomenon of carbon nanofiber-glass fiber/polyester composites manufactured with vacuum assisted resin transfer molding
Kuang-Ting Hsiao , Sudhir Gangireddy
Composites Part A: Applied Science and Manufacturing 39 ( 5) 834 -842
46
2008
Improved dimensional infidelity of curve-shaped VARTM composite laminates using a multi-stage curing technique – Experiments and modeling
Kai Jin Teoh , Kuang-Ting Hsiao
Composites Part A-applied Science and Manufacturing 42 ( 7) 762 -771
28
2011
Embedded single carbon fibre to sense the thermomechanical behavior of an epoxy during the cure process
Kuang-Ting Hsiao
Composites Part A-applied Science and Manufacturing 46 117 -121
6
2013
Suresh G Advani Dr. Sebastian Kirmse Bikash Ranabhat John W Gillespie Jr Vincenza Antonucci michele giordano Dirk Heider E. Murat Sözer Alejandro Rodriguez, Ph.D. Thomas G. Thomas Jr. Muhammad M. Rahman Andrew J. Whelton Aaron M. Forster Maryam Salehi Esfandarani, PhD Ajay Krishnamurthy Kendrick Q. Henderson