Oxidation of Sputtered Thin Films of Molybdenum Alloys at Ambient Conditions
G. Mori , A. List , N. Reinfried , J. Winkler
7
2009
Microstructure and Mechanical Properties of Si and Y Doped Tantalum
A. Voiticek , W. Knabl , Gerhard Dehm , Gerhard Dehm
16th International Plansee Seminar 2005 489 -503
3
2005
Assessment of grain boundary cohesion of technically pure and boron micro-doped molybdenum via meso-scale three-point-bending experiments
A. Lorich , W. Knabl , A. Hohenwarter , R. Pippan
Materials & Design 207 109848
9
2021
Microstructural evolution of W-10Re alloys due to thermal cycling at high temperatures and its impact on surface degradation
M. Siller , J. Schatte , S. Gerzoskovitz , W. Knabl
International Journal of Refractory Metals & Hard Materials 92 105285
1
2020
Interaction of precipitation, recovery and recrystallization in the Mo-Hf-C alloy MHC studied by multipass compression tests
M. Siller , D. Lang , J. Schatte , W. Knabl
International Journal of Refractory Metals & Hard Materials 73 199 -203
4
2018
Carbon doping - A key for the substitute of thoriated tungsten
H. Traxler , I. Wesemann , W. Knabl , M. Nilius
International Journal of Refractory Metals & Hard Materials 74 93 -98
2018
Influence of cross rolling and heat treatment on texture and forming properties of molybdenum sheets
C.-G. Oertel , I. Hünsche , W. Skrotzki , A. Lorich
International Journal of Refractory Metals & Hard Materials 28 ( 6) 722 -727
31
2010
On the recrystallization behavior of technically pure molybdenum
S. Primig , H. Leitner , H. Clemens , A. Lorich
International Journal of Refractory Metals & Hard Materials 28 ( 6) 703 -708
51
2010
Orientation dependent recovery and recrystallization behavior of hot-rolled molybdenum
S. Primig , H. Clemens , W. Knabl , A. Lorich
International Journal of Refractory Metals & Hard Materials 48 179 -186
19
2015
On the development of grain growth resistant tantalum alloys
M. Bischof , S. Mayer , H. Leitner , H. Clemens
International Journal of Refractory Metals & Hard Materials 24 ( 6) 437 -444
18
2006
Influence of crystal orientation and Berkovich tip rotation on the mechanical characterization of grain boundaries in molybdenum
S. Jakob , A. Leitner , A. Lorich , M. Eidenberger-Schober
Materials & Design 182 107998
18
2019
Grain boundary study of technically pure molybdenum by combining APT and TKD.
K. Babinsky , W. Knabl , A. Lorich , R. De Kloe
Ultramicroscopy 159 445 -451
28
2015
Fracture Toughness Investigations of Severe Plastic Deformed Tungsten Alloys
M. Faleschini , W. Knabl , R. Pippan
Springer, Dordrecht 445 -446
9
2006
On the chemistry of the carbides in a molybdenum base Mo-Hf-C alloy produced by powder metallurgy
D. Lang , C. Pöhl , D. Holec , J. Schatte
Journal of Alloys and Compounds 654 445 -454
15
2016
Evolution of strain-induced hafnium carbides in a molybdenum base Mo–Hf–C alloy studied by small-angle neutron scattering and complementary methods
D. Lang , L. Karge , J. Schatte , R. Gilles
Journal of Alloys and Compounds 688 619 -631
9
2016
Atom probe study of grain boundary segregation in technically pure molybdenum
K. Babinsky , J. Weidow , W. Knabl , A. Lorich
Materials Characterization 87 95 -103
49
2014
Properties and reliability of molybdenum-copper-composites for thermal management applications
M. Seiss , T. Mrotzek , T. Hutsch , W. Knabl
intersociety conference on thermal and thermomechanical phenomena in electronic systems 971 -975
2
2016
Zur Entwicklung von kornwachstumsstabilisierten Tantaldrähten
S. Mayer , M. Bischof , H. Leitner , H. Clemens
BHM Berg- und Hüttenmännische Monatshefte 150 ( 7) 246 -250
2005
Processing, Properties and Applications of Gamma Titanium Aluminide Sheet and Foil Materials
H. Clemens , W. Glatz , N. Eberhardt , H.-P. Martinz
MRS Proceedings 460 29
25
1996
Investigation of the flickering of La2O3 and ThO2 doped tungsten cathodes
T. Hoebing , P. Hermanns , A. Bergner , C. Ruhrmann
Journal of Applied Physics 118 ( 2) 023306
9
2015