Thermo-mechanical Characterization of Metal/Polymer Composite Filaments and Printing Parameter Study for Fused Deposition Modeling in the 3D Printing Process
作者： Seyeon Hwang , Edgar I. Reyes , Kyoung-sik Moon , Raymond C. Rumpf , Nam Soo Kim
DOI: 10.1007/S11664-014-3425-6
关键词: Fused deposition modeling 、 Polymer 、 Thermal conductivity 、 Acrylonitrile butadiene styrene 、 Metal powder 、 Composite material 、 Thermoplastic 、 Thermal expansion 、 Ultimate tensile strength 、 Materials science
摘要: New metal/polymer composite filaments for fused deposition modeling (FDM) processes were developed in order to observe the thermo-mechanical properties of new filaments. The acrylonitrile butadiene styrene (ABS) thermoplastic was mixed with copper and iron particles. percent loading metal powder varied confirm effects particles on filament, such as tensile strength thermal conductivity. printing parameters temperature fill density also see final product which made FDM process. As a result this study, it confirmed that composites is decreased by increasing Additionally, conductivity filament improved content. It believed could be used print large-scale 3-dimensional (3D) structures without any distortion expansion thermoplastics. material 3D printed circuits electromagnetic shielding other applications.
springer.com
harvard.edu
sci-hub.se 参考文章(14)
Joseph D. Bronzino, The Biomedical Engineering Handbook ,(1995)
Anna Bellini, Selçuk Güçeri, Mechanical characterization of parts fabricated using fused deposition modeling Rapid Prototyping Journal. ,vol. 9, pp. 252- 264 ,(2003) , 10.1108/13552540310489631
Sung‐Hoon Ahn, Michael Montero, Dan Odell, Shad Roundy, Paul K. Wright, Anisotropic material properties of fused deposition modeling ABS Rapid Prototyping Journal. ,vol. 8, pp. 248- 257 ,(2002) , 10.1108/13552540210441166
S.H. Masood, W.Q. Song, Thermal characteristics of a new metal/polymer material for FDM rapid prototyping process Assembly Automation. ,vol. 25, pp. 309- 315 ,(2005) , 10.1108/01445150510626451
S.H Masood, W.Q Song, Development of new metal/polymer materials for rapid tooling using Fused deposition modelling Materials & Design. ,vol. 25, pp. 587- 594 ,(2004) , 10.1016/J.MATDES.2004.02.009
Kenneth N. Han, Nam Soo Kim, Challenges and Opportunities in Direct Write Technology Using Nano-metal Particles Kona Powder and Particle Journal. ,vol. 27, pp. 73- 83 ,(2009) , 10.14356/KONA.2009009
Lawrence E. Murr, Sara M. Gaytan, Diana A. Ramirez, Edwin Martinez, Jennifer Hernandez, Krista N. Amato, Patrick W. Shindo, Francisco R. Medina, Ryan B. Wicker, Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies Journal of Materials Science & Technology. ,vol. 28, pp. 1- 14 ,(2012) , 10.1016/S1005-0302(12)60016-4
E.O. Olakanmi, Selective laser sintering/melting (SLS/SLM) of pure Al, Al-Mg, and Al-Si powders: Effect of processing conditions and powder properties Journal of Materials Processing Technology. ,vol. 213, pp. 1387- 1405 ,(2013) , 10.1016/J.JMATPROTEC.2013.03.009
Michiel van Leeuwen, Nicolaas A.A. Buijs, André B. Canelas, Arthur Oudshoorn, Joseph J. Heijnen, Walter M. van Gulik, The Hagen–Poiseuille pump for parallel fed-batch cultivations in microbioreactors Chemical Engineering Science. ,vol. 64, pp. 1877- 1884 ,(2009) , 10.1016/J.CES.2009.01.015
Brecht Van Hooreweder, David Moens, Rene Boonen, Jean-Pierre Kruth, Paul Sas, On the difference in material structure and fatigue properties of nylon specimens produced by injection molding and selective laser sintering Polymer Testing. ,vol. 32, pp. 972- 981 ,(2013) , 10.1016/J.POLYMERTESTING.2013.04.014