Wear behavior of as‐cast and heat treated triple particle size SiC reinforced aluminum metal matrix composites
作者： Abdul Maleque , Rezaul Karim
DOI: 10.1108/00368790910940392
关键词: Alloy 、 Metallurgy 、 Aluminium 、 Silicon carbide 、 Particle size 、 Composite material 、 Metal 、 Precipitation (chemistry) 、 Composite number 、 Matrix (chemical analysis) 、 Materials science 、 General Energy 、 Mechanical engineering 、 Surfaces, Coatings and Films
摘要: Purpose – The purpose of this paper is to study the wear behavior as‐cast (AC) and heat treated (HT) triple particle size (TPS) silicon carbide (SiC) reinforced aluminum alloy‐based metal matrix composites (SiCp/Al‐MMC).Design/methodology/approach Al‐MMCs were prepared using 20 vol.% SiC reinforcement into developed a stir casting process. Stir primary process composite production whereby ingredient material incorporated molten by stirring. TPS consist three different sizes viz., coarse, intermediate, fine. solution treatment was done on AC at 540°C for 4 h followed precipitation treatment. test carried out pin‐on‐disc type tribo‐test machine under dry sliding condition. A mathematical analysis also power factor values based friction results. morphology damaged surface studied optical microsco...
iium.edu.my
emeraldinsight.com参考文章(11)
Abdul Maleque, Rezaul Karim, Tribological behavior of dual and triple particle size SiC reinforced Al‐MMCs: a comparative study Industrial Lubrication and Tribology. ,vol. 60, pp. 189- 194 ,(2008) , 10.1108/00368790810881533
Zongyi Ma, Jing Bi, Yuxiong Lu, Hongwei Shen, Yinxuan Gao, Abrasive wear of discontinuous SiC reinforced aluminum alloy composites Wear. ,vol. 148, pp. 287- 293 ,(1991) , 10.1016/0043-1648(91)90290-B
A Sidorenko, Hyo-Sok Ahn, Doo-In Kim, H Yang, V.V Tsukruk, Wear stability of polymer nanocomposite coatings with trilayer architecture Wear. ,vol. 252, pp. 946- 955 ,(2002) , 10.1016/S0043-1648(02)00048-0
S.C. Lim, M. Gupta, L. Ren, J.K.M. Kwok, The tribological properties of Al–Cu/SiCp metal–matrix composites fabricated using the rheocasting technique Journal of Materials Processing Technology. ,vol. 89, pp. 591- 596 ,(1999) , 10.1016/S0924-0136(99)00067-9
S. Naher, D. Brabazon, L. Looney, Development and assessment of a new quick quench stir caster design for the production of metal matrix composites Journal of Materials Processing Technology. ,vol. 166, pp. 430- 439 ,(2005) , 10.1016/J.JMATPROTEC.2004.09.043
G. Straffelini, F. Bonollo, A. Molinari, A. Tiziani, Influence of matrix hardness on the dry sliding behaviour of 20 vol.% Al2O3-particulate-reinforced 6061 Al metal matrix composite Wear. ,vol. 211, pp. 192- 197 ,(1997) , 10.1016/S0043-1648(97)00119-1
Rong Chen, Akira Iwabuchi, Tomoharu Shimizu, The effect of a T6 heat treatment on the fretting wear of a SiC particle-reinforced A356 aluminum alloy matrix composite Wear. ,vol. 238, pp. 110- 119 ,(2000) , 10.1016/S0043-1648(99)00328-2
F.E. Kennedy, A.C. Balbahadur, D.S. Lashmore, The friction and wear of Cu-based silicon carbide particulate metaal matrix composites for brake applications Wear. pp. 715- 721 ,(1997) , 10.1016/S0043-1648(96)07451-0
Grigoris E Kiourtsidis, Stefanos M Skolianos, Wear behavior of artificially aged AA2024/40 μm SiCp composites in comparison with conventionally wear resistant ferrous materials Wear. ,vol. 253, pp. 946- 956 ,(2002) , 10.1016/S0043-1648(02)00216-8
J.K.M. Kwok, S.C. Lim, High-speed tribological properties of some Al/SiCp composites : II. Wear mechanisms Composites Science and Technology. ,vol. 59, pp. 65- 75 ,(1999) , 10.1016/S0266-3538(98)00067-0