A finite element analysis study of micromechanical interfacial characteristics of metal matrix composites
作者： S. Balasivanandha Prabu , L. Karunamoorthy , G.S. Kandasami
DOI: 10.1016/J.JMATPROTEC.2004.04.157
关键词: Fiber pull-out 、 Shear (sheet metal) 、 Composite material 、 Finite element method 、 Shear stress 、 Fiber 、 Ultimate tensile strength 、 Materials science 、 Stress (mechanics) 、 Volume fraction
摘要: Abstract This paper reports a finite element study of effect volume fraction SiC and diameter the fiber on interfacial stress/strain characteristics 6061 Al/SiC metal matrix composites. The tensile behaviour composite is simulated by using method. To simulate composite, unit cell model developed in ANSYS 5.4 appropriate boundary conditions were applied model. An attempt made to influence stress transfer from fiber. In analysis, it found that plays an important role debonding results show more pronounced near axis symmetry. initiated purely shear maximum occurs just inside at some distance free end propagate as load increases.
elsevier.com
sci-hub.se 参考文章(9)
N Chandra, CR Ananth, ANALYSIS OF INTERFACIAL BEHAVIOR IN MMCs AND IMCs BY THE USE OF THIN-SLICE PUSH-OUT TESTS Composites Science and Technology. ,vol. 54, pp. 87- 100 ,(1995) , 10.1016/0266-3538(95)00040-2
WS Johnson, PA Lagace, JE Masters, SK Mital, CC Chamis, Fiber pushout test - A three-dimensional finite element computational simulation Journal of Composites Technology & Research. ,vol. 13, pp. 14- 21 ,(1991) , 10.1520/CTR10069J
E.K Gamstedt, M Skrifvars, T.K Jacobsen, R Pyrz, Synthesis of unsaturated polyesters for improved interfacial strength in carbon fibre composites Composites Part A-applied Science and Manufacturing. ,vol. 33, pp. 1239- 1252 ,(2002) , 10.1016/S1359-835X(02)00077-5
W.D Zeng, P.W.M Peters, Y Tanaka, Interfacial bond strength and fracture energy at room and elevated temperature in titanium matrix composites (SCS-6/Timetal 834) Composites Part A-applied Science and Manufacturing. ,vol. 33, pp. 1159- 1170 ,(2002) , 10.1016/S1359-835X(02)00089-1
Dong Sheng Li, Michael R. Wisnom, Finite Element Micromechanical Modelling of Unidirectional Fibre Reinforced Metal Matrix Composites Composites Science and Technology. ,vol. 51, pp. 545- 563 ,(1994) , 10.1016/0266-3538(94)90088-4
Xiaoyu Jiang, Qing Gao, Stress-transfer analysis for fibre/matrix interfaces in short-fibre-reinforced composites Composites Science and Technology. ,vol. 61, pp. 1359- 1366 ,(2001) , 10.1016/S0266-3538(01)00034-3
S.A Hayes, R Lane, F.R Jones, Fibre/matrix stress transfer through a discrete interphase. Part 1: single-fibre model composites Composites Part A-applied Science and Manufacturing. ,vol. 32, pp. 379- 389 ,(2001) , 10.1016/S1359-835X(00)00127-5
C.T. Sun, R.S. Vaidya, Prediction of composite properties from a representative volume element Composites Science and Technology. ,vol. 56, pp. 171- 179 ,(1996) , 10.1016/0266-3538(95)00141-7
H Ismar, F Schröter, F Streicher, Inelastic behavior of metal-matrix composites reinforced with fibres of silicon carbide, alumina or carbon: a finite-element analysis Composites Science and Technology. ,vol. 60, pp. 2129- 2136 ,(2000) , 10.1016/S0266-3538(00)00116-0