Optimization with Taguchi Method of Influences on Surface Roughness of Cutting Parameters in CNC Turning Processing
作者： Mustafa özdemir
DOI: 10.5755/J01.MECH.25.5.23005
关键词: Machinability 、 Numerical control 、 Noise (signal processing) 、 Taguchi methods 、 Orthogonal array 、 Surface roughness 、 Depth of cut 、 Signal 、 Materials science 、 Composite material
摘要: In this study, the effect of cutting speed, feed rate, and depth of cut on surface roughness was experimentally examined in the processing of AISI 409 (ferritic chromium stainless …
sci-hub.st 参考文章(18)
Ali Riza Motorcu, Karbon Çeliğinin Seramik Kesici Takımlarla İşlenmesinde Yüzey Pürüzlülüğünün Değerlendirilmesi Uludağ University Journal of The Faculty of Engineering. ,vol. 14, ,(2009) , 10.17482/UUJFE.21390
J.C. Outeiro, D. Umbrello, R. M’Saoubi, Experimental and numerical modelling of the residual stresses induced in orthogonal cutting of AISI 316L steel International Journal of Machine Tools & Manufacture. ,vol. 46, pp. 1786- 1794 ,(2006) , 10.1016/J.IJMACHTOOLS.2005.11.013
Else Eriksen, Influence from production parameters on the surface roughness of a machined short fibre reinforced thermoplastic International Journal of Machine Tools and Manufacture. ,vol. 39, pp. 1611- 1618 ,(1999) , 10.1016/S0890-6955(99)00017-6
Yusuf Ozcatalbas, Fevzi Ercan, The effects of heat treatment on the machinability of mild steels Journal of Materials Processing Technology. ,vol. 136, pp. 227- 238 ,(2003) , 10.1016/S0924-0136(03)00273-5
Hong Yan, J. Hua, R. Shivpuri, Numerical simulation of finish hard turning for AISI H13 die steel Science and Technology of Advanced Materials. ,vol. 6, pp. 540- 547 ,(2005) , 10.1016/J.STAM.2005.04.002
Khaider Bouacha, Mohamed Athmane Yallese, Tarek Mabrouki, Jean-François Rigal, Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool International Journal of Refractory Metals & Hard Materials. ,vol. 28, pp. 349- 361 ,(2010) , 10.1016/J.IJRMHM.2009.11.011
Uğur Köklü, Optimisation of machining parameters in interrupted cylindrical grinding using the Grey-based Taguchi method International Journal of Computer Integrated Manufacturing. ,vol. 26, pp. 696- 702 ,(2013) , 10.1080/0951192X.2012.749537
Hamdi Aouici, Mohamed Athmane Yallese, Kamel Chaoui, Tarek Mabrouki, Jean-François Rigal, Analysis of surface roughness and cutting force components in hard turning with CBN tool: Prediction model and cutting conditions optimization Measurement. ,vol. 45, pp. 344- 353 ,(2012) , 10.1016/J.MEASUREMENT.2011.11.011
Hae-Sung Yoon, Renzhe Wu, Tae-Moo Lee, Sung-Hoon Ahn, Geometric optimization of micro drills using Taguchi methods and response surface methodology International Journal of Precision Engineering and Manufacturing. ,vol. 12, pp. 871- 875 ,(2011) , 10.1007/S12541-011-0116-6
M. Cemal Cakir, Cihat Ensarioglu, Ilker Demirayak, Mathematical modeling of surface roughness for evaluating the effects of cutting parameters and coating material Journal of Materials Processing Technology. ,vol. 209, pp. 102- 109 ,(2009) , 10.1016/J.JMATPROTEC.2008.01.050