Karbon Çeliğinin Seramik Kesici Takımlarla İşlenmesinde Yüzey Pürüzlülüğünün Değerlendirilmesi
作者： Ali Riza Motorcu
DOI: 10.17482/UUJFE.21390
关键词:
摘要: The response surface methodology was adopted to investigate the effects of main cutting parameters such as speed, feed rate, and depth cut on roughness when turning AISI 1050 carbon steel. Machining tests were carried out with uncoated ceramic (KY1615) coated tools (KY4400). Optimal machining conditions for desired finish determined. adequacy second order developed model analyzed by using analysis variance. experimental results indicated that rate dominant factor, followed cut. speed showed minimal effect roughness. It could be seen KY1615 tool produced a better than KY4400 tool. shown average roughness' Ra values about 2.515 μm, 2.984 μm KY1615, tools, respectively. Furthermore, variance second-order squares terms significant roughness, but interaction insignifi- cant both tools.
sci-hub.st 参考文章(19)
J. Paulo Davim, Luís Figueira, Machinability evaluation in hard turning of cold work tool steel (D2) with ceramic tools using statistical techniques Materials & Design. ,vol. 28, pp. 1186- 1191 ,(2007) , 10.1016/J.MATDES.2006.01.011
T. Sata, M. Li, S. Takata, H. Hiraoka, C.Q. Li, X.Z. Xing, X.G. Xiao, Analysis of Surface Roughness Generation in Turning Operation and its Applications CIRP Annals. ,vol. 34, pp. 473- 476 ,(1985) , 10.1016/S0007-8506(07)61814-9
W.S. Lin, B.Y. Lee, C.L. Wu, Modeling the surface roughness and cutting force for turning Journal of Materials Processing Technology. ,vol. 108, pp. 286- 293 ,(2001) , 10.1016/S0924-0136(00)00835-9
X. Wang, C.X. Feng, Development of Empirical Models for Surface Roughness Prediction in Finish Turning The International Journal of Advanced Manufacturing Technology. ,vol. 20, pp. 348- 356 ,(2002) , 10.1007/S001700200162
I. Puertas Arbizu, C.J. Luis Pérez, Surface roughness prediction by factorial design of experiments in turning processes Journal of Materials Processing Technology. ,vol. 143, pp. 390- 396 ,(2003) , 10.1016/S0924-0136(03)00407-2
Yung-Chang Yen, Anurag Jain, Taylan Altan, A finite element analysis of orthogonal machining using different tool edge geometries Journal of Materials Processing Technology. ,vol. 146, pp. 72- 81 ,(2004) , 10.1016/S0924-0136(03)00846-X
S.M Darwish, The impact of the tool material and the cutting parameters on surface roughness of supermet 718 nickel superalloy Journal of Materials Processing Technology. ,vol. 97, pp. 10- 18 ,(2000) , 10.1016/S0924-0136(99)00365-9
Yusuf Sahin, A. Riza Motorcu, Surface roughness model for machining mild steel with coated carbide tool Materials & Design. ,vol. 26, pp. 321- 326 ,(2005) , 10.1016/J.MATDES.2004.06.015
ANIL MITAL, MANISH MEHTA, Surface finish prediction models for fine turning International Journal of Production Research. ,vol. 26, pp. 1861- 1876 ,(1988) , 10.1080/00207548808948001
W.H. Yang, Y.S. Tarng, Design optimization of cutting parameters for turning operations based on the Taguchi method Journal of Materials Processing Technology. ,vol. 84, pp. 122- 129 ,(1998) , 10.1016/S0924-0136(98)00079-X