Reply to comments on "Intergranular fracture caused by trace impurities in an Al-5.5 mol% Mg alloy"

作者: Keitaro Horikawa , Shigeru Kuramoto , Motohiro Kanno

DOI: 10.1016/S1359-6462(02)00112-4

关键词: MetallurgyAlloyImpurityIntergranular fractureSodiumEmbrittlementMaterials science

摘要: Abstract The mechanism of high temperature embrittlement caused by trace sodium (∼2 ppm) in an ultra-high purity Al–5.5 mol% Mg alloy with coarse grains is discussed comparison previous reports and other proposed mechanisms.

参考文章(18)
John J. Lewandowski, V. Kohler, N.J.H. Holroyd, Effects of lead on the sustained-load cracking of AlMgSi at ambient temperatures Materials Science and Engineering. ,vol. 96, pp. 185- 195 ,(1987) , 10.1016/0025-5416(87)90552-0
Toshiro KOBAYASHI, Mitsuo NIINOMI, Kimio DEGAWA, Impact Toughness Of Al-Li System Alloys At Low Temperatures Journal of Japan Institute of Light Metals. ,vol. 37, pp. 816- 823 ,(1987) , 10.2464/JILM.37.816
Hisashi Suzuki, Goroh Itoh, A Study of Intermediate Temperature Embrittlement in Pure Copper Journal of The Japan Institute of Metals. ,vol. 48, pp. 1016- 1021 ,(1984) , 10.2320/JINSTMET1952.48.10_1016
Masahisa Otsuka, Ryo Horiuchi, Origin of the Ductility Loss of Al-Mg Alloy at High Temperatures Journal of The Japan Institute of Metals. ,vol. 48, pp. 1143- 1151 ,(1984) , 10.2320/JINSTMET1952.48.12_1143
Masahisa Otsuka, Ryo Horiuchi, Ductility Loss of Al-Mg Alloys at High Temperatures Journal of The Japan Institute of Metals. ,vol. 48, pp. 688- 693 ,(1984) , 10.2320/JINSTMET1952.48.7_688
T. H. Sanders, E. A. Starke, Aluminum alloys their physical and mechanical properties Engineering Materials Advisory Services. ,(1986)
S.P. Lynch, Solid-metal-induced embrittlement of aluminium alloys and other materials Materials Science and Engineering: A. ,vol. 108, pp. 203- 212 ,(1989) , 10.1016/0921-5093(89)90421-8
Donald Webster, The effect of low melting point impurities on the properties of aluminum-lithium alloys Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 18, pp. 2181- 2193 ,(1987) , 10.1007/BF02647091