Deposition of Coating to Protect Waste Water Reservoir in Acidic Solution by Arc Thermal Spray Process

作者: Han-Seung Lee , Jin-ho Park , Jitendra Kumar Singh , Mohamed A Ismail , None

DOI: 10.1155/2018/4050175

关键词: Scanning electron microscopeMaterials scienceTitaniumOxideAnataseCoatingCorrosionMicrostructureChemical engineeringThermal spraying

摘要: The corrosion characteristics of 304 stainless steel (SS) and titanium (Ti) coatings deposited by the arc thermal spray process in pH 4 solution were assessed. Ti-sprayed coating exhibits uniform, less porous, adherent morphology compared to SS-sprayed coating. electrochemical study, that is, impedance spectroscopy (EIS), revealed as exposure periods increased, polarization resistance (Rp) decreased charge transfer (Rct) increased owing metallic surface simultaneously at same time deposition oxide films/corrosion on SS- sprayed surface, while Ti transformed unstable oxides into stable phase. Potentiodynamic studies confirmed both exhibited passive tendency attributed due products SS samples, whereas sample formed films. reduced rate more than six times after 312 h sulfuric acid- (H2SO4-) contaminated water solution, 4. Scanning electron microscope (SEM) results uniform globular film resulting corrosion. On other hand, exhibit micropores with a net-like microstructure. X- ray diffraction (XRD) presence composite samples lepidocrocite (γ-FeOOH) SS-coated surface. transformation TiO Ti3O TiO2 (rutile anatase) Ti3O5 H2SO4 acid reveals improved properties

参考文章(69)
R. N. Swamy, S. Tanikawa, An external surface coating to protect concrete and steel from aggressive environments Materials and Structures. ,vol. 26, pp. 465- 478 ,(1993) , 10.1007/BF02472806
Herking Song, Digby D. Macdonald, Photoelectrochemical Impedance Spectroscopy I . Validation of the Transfer Function by Kramers‐Kronig Transformation Journal of The Electrochemical Society. ,vol. 138, pp. 1408- 1410 ,(1991) , 10.1149/1.2085796
W. Y. Lai, W. Z. Zhao, Z. F. Yin, J. Zhang, EIS and XPS studies on passive film of AISI 304 stainless steel in dilute sulfuric acid solution Surface and Interface Analysis. ,vol. 44, pp. 418- 425 ,(2012) , 10.1002/SIA.3819
F.J. Martin, G.T. Cheek, W.E. O’Grady, P.M. Natishan, Impedance studies of the passive film on aluminium Corrosion Science. ,vol. 47, pp. 3187- 3201 ,(2005) , 10.1016/J.CORSCI.2005.05.058
J. Pouilleau, D. Devilliers, F. Garrido, S. Durand-Vidal, E. Mahé, Structure and composition of passive titanium oxide films Materials Science and Engineering B-advanced Functional Solid-state Materials. ,vol. 47, pp. 235- 243 ,(1997) , 10.1016/S0921-5107(97)00043-3
Satendra Kumar, T.S.N. Sankara Narayanan, S. Ganesh Sundara Raman, S.K. Seshadri, Thermal oxidation of CP-Ti: Evaluation of characteristics and corrosion resistance as a function of treatment time Materials Science and Engineering: C. ,vol. 29, pp. 1942- 1949 ,(2009) , 10.1016/J.MSEC.2009.03.007
Yanjie Liu, Zhenyao Wang, Wei Ke, Study on influence of native oxide and corrosion products on atmospheric corrosion of pure Al Corrosion Science. ,vol. 80, pp. 169- 176 ,(2014) , 10.1016/J.CORSCI.2013.11.027
D. Dzhurinskiy, E. Maeva, Ev. Leshchinsky, R. Gr. Maev, Corrosion Protection of Light Alloys Using Low Pressure Cold Spray Journal of Thermal Spray Technology. ,vol. 21, pp. 304- 313 ,(2012) , 10.1007/S11666-011-9729-7
O. de Rincón, A. Rincón, M. Sánchez, N. Romero, O. Salas, R. Delgado, B. López, J. Uruchurtu, M. Marroco, Zephir Panosian, Evaluating Zn, Al and Al–Zn coatings on carbon steel in a special atmosphere Construction and Building Materials. ,vol. 23, pp. 1465- 1471 ,(2009) , 10.1016/J.CONBUILDMAT.2008.07.002
Xiaoliang Cheng, Sharon G. Roscoe, Corrosion behavior of titanium in the presence of calcium phosphate and serum proteins. Biomaterials. ,vol. 26, pp. 7350- 7356 ,(2005) , 10.1016/J.BIOMATERIALS.2005.05.047