Multiphysics simulation of added carbon particles within fluidized bed anode zinc-electrode

作者: Ibitoye Adelusi , Chiemela Victor Amaechi , Fabrice Andrieux , Richard Dawson

DOI: 10.1088/2631-8695/AB8958

关键词: AnodeFluidized bedMaterials scienceShort circuitDendrite (crystal)MultiphysicsFabricationComposite materialElectrolyteElectrode

摘要: Batteries will continue to encounter the problem of dendrite formation until a suitable solution is identified address problem. Dendrite can short circuit batteries cells, reduce their life span, voltages and cause mechanical abrasion cells. electrodes are part approaches that be used these problems but depending on fabrication dimensions. Before fabricating incorporating real anode reactor fabricated ZnBr2 cell system, it was necessary model behaviour with injected carbon particles in between 254 microns 354 simulate geometry COMSOL observe interaction electrolyte. This study investigates performances designed within effect having uniform non-uniform current density distribution before fabrication, physically charge anode-side system.

参考文章(38)
Brian C. H. Steele, Angelika Heinzel, Materials for fuel-cell technologies Nature. ,vol. 414, pp. 345- 352 ,(2001) , 10.1038/35104620
Cheng-Lin Liu, Ze Sun, Gui-Min Lu, Xing-Fu Song, Jian-Guo Yu, Experimental and numerical investigation of two‐phase flow patterns in magnesium electrolysis cell with non‐uniform current density distribution Canadian Journal of Chemical Engineering. ,vol. 93, pp. 565- 579 ,(2015) , 10.1002/CJCE.22135
Vít Orava, Ondřej Souček, Peter Cendula, Multi-phase modeling of non-isothermal reactive flow in fluidized bed reactors Journal of Computational and Applied Mathematics. ,vol. 289, pp. 282- 295 ,(2015) , 10.1016/J.CAM.2015.01.012
F. B. Thomas, P. A. Ramachandran, M. P. Dudukovic, R. E. W. Jansson, Laminar radial flow electrochemical reactors. I. Flow fields Journal of Applied Electrochemistry. ,vol. 18, pp. 768- 780 ,(1988) , 10.1007/BF01016906
Maryam Mohagheghi, Majid Hamidi, Cedric Briens, Franco Berruti, Jennifer McMillan, The effects of liquid properties and bed hydrodynamics on the distribution of liquid on solid fluidized particles in a cold-model fluidized bed Powder Technology. ,vol. 256, pp. 5- 12 ,(2014) , 10.1016/J.POWTEC.2014.01.083
Shuyan Wang, Ze Sun, Xin Li, Jinsen Gao, Xingying Lan, Qun Dong, Simulation of flow behavior of particles in liquid–solid fluidized bed with uniform magnetic field Powder Technology. ,vol. 237, pp. 314- 325 ,(2013) , 10.1016/J.POWTEC.2012.12.013
K. Pougatch, M. Salcudean, J. McMillan, Three-dimensional numerical modelling of interactions between a gas–liquid jet and a fluidized bed Chemical Engineering Science. ,vol. 68, pp. 258- 277 ,(2012) , 10.1016/J.CES.2011.09.037
Mohsen Hamidipour, Jinwen Chen, Faïçal Larachi, CFD study on hydrodynamics in three-phase fluidized beds—Application of turbulence models and experimental validation Chemical Engineering Science. ,vol. 78, pp. 167- 180 ,(2012) , 10.1016/J.CES.2012.05.016
Long Fan, Zai-Sha Mao, Chao Yang, Yundong Wang, Numerical simulation of laminar solid-liquid two-phase flow in stirred tanks Chemical Engineering Communications. ,vol. 194, pp. 291- 308 ,(2007) , 10.1080/00986440600829861
J.R. Burns, R.J.J. Jachuck, Determination of liquid–solid mass transfer coefficients for a spinning disc reactor using a limiting current technique International Journal of Heat and Mass Transfer. ,vol. 48, pp. 2540- 2547 ,(2005) , 10.1016/J.IJHEATMASSTRANSFER.2004.11.029