Effect of Temperature and Strain Rate on Dynamic Properties of Low Silicon TRIP Steel
作者： Rong Tian , Lin Li , B. C. De Cooman , Xi-chen Wei , Peng Sun
DOI: 10.1016/S1006-706X(06)60061-7
关键词: Tensile testing 、 Austenite 、 Strain (chemistry) 、 Elongation 、 Ultimate tensile strength 、 Metallurgy 、 Materials science 、 Slow strain rate testing 、 TRIP steel 、 Strain rate
摘要: Abstract The dynamic tensile test of 0.11C-0. 62Si-1.65Mn TRIP steel was carried out at different strain rates and temperatures. results show that both temperature rate affect the retained austenite transformation. At high rates, uniform elongation decreases, whereas total energy absorption increase. strength is less sensitive. With raising temperature, reduced mechanical properties generally deteriorate, especially 110 °C. However, excellent were obtained 50 °C 75
springer.com
elsevier.com
sci-hub.se 参考文章(10)
Koh-ichi Sugimoto, Tsutomu Iida, Jyunya Sakaguchi, Takahiro Kashima, Retained Austenite Characteristics and Tensile Properties in a TRIP Type Bainitic Sheet Steel Isij International. ,vol. 40, pp. 902- 908 ,(2000) , 10.2355/ISIJINTERNATIONAL.40.902
Koh-Ichi Sugimoto, Mitsuyuki Kobayashi, Shun-Ichi Hashimoto, Ductility and strain-induced transformation in a high-strength transformation-induced plasticity-aided dual-phase steel Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 23, pp. 3085- 3091 ,(1992) , 10.1007/BF02646127
Yasuharu Sakuma, David K. Matlock, George Krauss, Intercritically annealed and isothermally transformed 0.15 Pct C steels containing 1.2 Pct Si-1.5 Pct Mn and 4 Pct Ni: Part II. effect of testing temperature on stress-strain behavior and deformation-induced austenite transformation Metallurgical Transactions A. ,vol. 23, pp. 1233- 1241 ,(1992) , 10.1007/BF02665054
Masaaki Itabashi, Kozo Kawata, Carbon content effect on high-strain-rate tensile properties for carbon steels International Journal of Impact Engineering. ,vol. 24, pp. 117- 131 ,(2000) , 10.1016/S0734-743X(99)00050-0
Koh-ichi Sugimoto, Noboru Usui, Mitsuyuki Kobayashi, Shun-ichi Hashimoto, Effects of Volume Fraction and Stability of Retained Austenite on Ductility of TRIP-aided Dual-phase Steels Isij International. ,vol. 32, pp. 1311- 1318 ,(1992) , 10.2355/ISIJINTERNATIONAL.32.1311
Koh-ichi Sugimoto, Masahiro Misu, Mitsuyuki Kobayashi, Hidenori Shirasawa, Effects of Second Phase Morphology on Retained Austenite Morphology and Tensile Properties in a TRIP-aided Dual-phase Steel Sheet Isij International. ,vol. 33, pp. 775- 782 ,(1993) , 10.2355/ISIJINTERNATIONAL.33.775
D.A.S. Macdougall, J. Harding, The measurement of specimen surface temperature in high-speed tension and torsion tests International Journal of Impact Engineering. ,vol. 21, pp. 473- 488 ,(1998) , 10.1016/S0734-743X(98)00007-4
I. D. Choi, D. M. Bruce, S. J. Kim, C. G. Lee, S. H. Park, D. K. Matlock, J. G. Speer, Deformation Behavior of Low Carbon TRIP Sheet Steels at High Strain Rates Isij International. ,vol. 42, pp. 1483- 1489 ,(2002) , 10.2355/ISIJINTERNATIONAL.42.1483
Wolfgang Bleck, Ingo Schael, Determination of crash-relevant material parameters by dynamic tensile tests Steel Research. ,vol. 71, pp. 173- 178 ,(2000) , 10.1002/SRIN.200005709
Fu, Wei, Li, Shi, ON THE TENSILE MECHANICAL PROPERTY OF Si-Mn TRIP STEELS AT HIGH STRAIN RATE 金属学报：英文版. pp. 285- 294 ,(2002)