Surface integrity in finish hard turning of case-hardened steels
作者： J. Rech , A. Moisan
DOI: 10.1016/S0890-6955(02)00141-4
关键词: Point (geometry) 、 Bearing (mechanical) 、 Surface integrity 、 Tool wear 、 Metallurgy 、 Residual stress 、 Machining 、 Surface finish 、 Edge (geometry) 、 Engineering
摘要: Abstract Highly stressed steel components, e.g., gears and bearing parts, are appropriate applications for hard turning. Therefore, the process effects on significant engineering properties of work materials have to be carefully analyzed. Roughness, residual stresses, white layers as parts surface integrity, functions machining parameters cuttability cutting edge, i.e. tool wear. The aim this was study influence feed rate, speed, wear induced by turning case-hardened 27MnCr5 gear conebrakes point out technical limitations in mass production.
elsevier.com
sci-hub.se 参考文章(13)
W. König, M. Klinger, R. Link, Machining Hard Materials with Geometrically Defined Cutting Edges — Field of Applications and Limitations CIRP Annals. ,vol. 39, pp. 61- 64 ,(1990) , 10.1016/S0007-8506(07)61003-8
W. König, A. Berktold, K.-F. Koch, Turning versus grinding: a comparison of surface integrity aspects and attainable accuracies CIRP Annals. ,vol. 42, pp. 39- 43 ,(1993) , 10.1016/S0007-8506(07)62387-7
J Rech, A Kusiak, J.L Battaglia, Tribological and thermal functions of cutting tool coatings Surface & Coatings Technology. ,vol. 186, pp. 364- 371 ,(2004) , 10.1016/J.SURFCOAT.2003.11.027
M.C. Shaw, A. Vyas, Heat-Affected Zones in Grinding Steel CIRP Annals. ,vol. 43, pp. 279- 282 ,(1994) , 10.1016/S0007-8506(07)62213-6
Jeffrey D Thiele, Shreyes N. Melkote, Effect of cutting edge geometry and workpiece hardness on surface generation in the finish hard turning of AISI 52100 steel Journal of Materials Processing Technology. ,vol. 94, pp. 216- 226 ,(1999) , 10.1016/S0924-0136(99)00111-9
J Paulo Davim, Ed., Machining of Hard Materials CIRP Annals. ,vol. 33, pp. 417- 427 ,(1984) , 10.1016/S0007-8506(16)30164-0
Gérard Poulachon, Aspects phenomenologiques, mecaniques et metallurgiques en tournage c-bn des aciers durcis. Application : usinabilite de l'acier 100cr6 Paris, ENSAM. ,(1999)
H.A Kishawy, M.A Elbestawi, Effects of process parameters on material side flow during hard turning International Journal of Machine Tools and Manufacture. ,vol. 39, pp. 1017- 1030 ,(1999) , 10.1016/S0890-6955(98)00084-4
Y.Kevin Chou, Chris J. Evans, White layers and thermal modeling of hard turned surfaces International Journal of Machine Tools and Manufacture. ,vol. 39, pp. 1863- 1881 ,(1999) , 10.1016/S0890-6955(99)00036-X
Y. Matsumoto, F. Hashimoto, G. Lahoti, Surface Integrity Generated by Precision Hard Turning Cirp Annals-manufacturing Technology. ,vol. 48, pp. 59- 62 ,(1999) , 10.1016/S0007-8506(07)63131-X