Komparativna studija skidanja materijala u strojnoj obradi tvrdih površina provrtanih rupa
作者： István Deszpoth , János Kundrák , Viktor Molnár
DOI:
关键词:
摘要: In the technological planning of hard machining procedures, several factors component have to be considered. One factor is system geometrical dimensions components. The potential procedures capable providing required accuracy and quality specified surfaces, and/or their (economical) efficiency can also influenced by dimensions. Beyond generally prevailing time study, in present paper material removal rate surface are investigated referring hardened internal cylindrical surfaces. These parameters referred unit operation time. values analysed at different bore geometries. investigations performed for with inserts, as well a combined grinding procedure, given conventional (traverse) basis comparison.
参考文章(9)
J. Rech, A. Moisan, Surface integrity in finish hard turning of case-hardened steels International Journal of Machine Tools and Manufacture. ,vol. 43, pp. 543- 550 ,(2003) , 10.1016/S0890-6955(02)00141-4
Y. Sahin, A.R. Motorcu, Surface roughness model in machining hardened steel with cubic boron nitride cutting tool International Journal of Refractory Metals & Hard Materials. ,vol. 26, pp. 84- 90 ,(2008) , 10.1016/J.IJRMHM.2007.02.005
H.K. Tönshoff, C. Arendt, R. Ben Amor, Cutting of Hardened Steel CIRP Annals. ,vol. 49, pp. 547- 566 ,(2000) , 10.1016/S0007-8506(07)63455-6
Y.B. Guo, A.W. Warren, The impact of surface integrity by hard turning vs. grinding on fatigue damage mechanisms in rolling contact Surface & Coatings Technology. ,vol. 203, pp. 291- 299 ,(2008) , 10.1016/J.SURFCOAT.2008.09.005
V. García Navas, I. Ferreres, J.A. Marañón, C. Garcia-Rosales, J. Gil Sevillano, Electro-discharge machining (EDM) versus hard turning and grinding—Comparison of residual stresses and surface integrity generated in AISI O1 tool steel Journal of Materials Processing Technology. ,vol. 195, pp. 186- 194 ,(2008) , 10.1016/J.JMATPROTEC.2007.04.131
F. Klocke, E. Brinksmeier, K. Weinert, Capability Profile of Hard Cutting and Grinding Processes CIRP Annals. ,vol. 54, pp. 22- 45 ,(2005) , 10.1016/S0007-8506(07)60018-3
Y.B Guo, J Sahni, A comparative study of hard turned and cylindrically ground white layers International Journal of Machine Tools & Manufacture. ,vol. 44, pp. 135- 145 ,(2004) , 10.1016/J.IJMACHTOOLS.2003.10.009
J. Kundrák, A. Markopoulos, A. G. Mamalis, Finishing of Hardened Boreholes: Grinding or Hard Cutting? Materials and Manufacturing Processes. ,vol. 19, pp. 979- 993 ,(2004) , 10.1081/LMMP-200034480
R.A. Waikar, Y.B. Guo, A comprehensive characterization of 3D surface topography induced by hard turning versus grinding Journal of Materials Processing Technology. ,vol. 197, pp. 189- 199 ,(2008) , 10.1016/J.JMATPROTEC.2007.05.054