Progress report for EMRP project “High Temperature Metrology for Industrial Applications”; HiTeMS
作者： Graham Machin , Klaus Anhalt , Frank Edler , Jonathan Pearce , Mohamed Sadli
DOI: 10.1051/METROLOGY/201315001
关键词: Metrology 、 Engineering 、 Systems engineering 、 Domain (software engineering) 、 Engineering physics 、 Front (military)
摘要: This paper gives an overview of the progress with European Metrology Research Programme (EMRP) project “High Temperature for Industrial Applications” (HiTeMS). The objective is to address, on a broad front, number unsolved measurement challenges in domain high temperatures above 1000 °C, both non-contact and contact thermometry. It brings together total 15 partner organisations; National Measurement Institutes (NMIs) (10), industrial companies (4) Fraunhofer Institute. started September 2011 will end August 2014, though it envisaged that developments here have impact temperature long after completed.
researchgate.net 
sci-hub.st 参考文章(14)
James F. Schooley, Temperature : its measurement and control in science and industry American Institute of Physics. ,(1992)
Steffen Bonss, Marko Seifert, Berndt Brenner, Eckhard Beyer, Precise hardening with high-power diode lasers using beam-shaping mirror optics High-power lasers and applications. ,vol. 4973, pp. 86- 93 ,(2003) , 10.1117/12.478380
J. V. Pearce, C. J. Elliott, G. Machin, O. Ongrai, Self-validating type C thermocouples to 2300 °C using high temperature fixed points TEMPERATURE: ITS MEASUREMENT AND CONTROL IN SCIENCE AND INDUSTRY, VOLUME 8: Proceedings of the Ninth International Temperature Symposium. ,vol. 1552, pp. 595- 600 ,(2013) , 10.1063/1.4821396
F Edler, P Seefeld, Self-validating contact thermometry sensors for higher temperatures Measurement Science and Technology. ,vol. 26, pp. 015102- ,(2015) , 10.1088/0957-0233/26/1/015102
E M Vuelban, Determining size-of-source effect using the scanning slit method Measurement Science and Technology. ,vol. 24, pp. 105007- ,(2013) , 10.1088/0957-0233/24/10/105007
M. Bart, E. W. M. van der Ham, P. Saunders, A New Method to Determine the Size-of-Source Effect International Journal of Thermophysics. ,vol. 28, pp. 2111- 2117 ,(2007) , 10.1007/S10765-007-0251-6
M. J. Martin, M. Zarco, D. Del Campo, Calibration of Thermocouples and Infrared Radiation Thermometers by Comparison to Radiation Thermometry International Journal of Thermophysics. ,vol. 32, pp. 383- 395 ,(2011) , 10.1007/S10765-011-0937-7
G. Machin, K. Anhalt, F. Edler, J. V. Pearce, M. Sadli, R. Strnad, E. M. Vuelban, HiTeMS: A project to solve high temperature measurement problems in industry TEMPERATURE: ITS MEASUREMENT AND CONTROL IN SCIENCE AND INDUSTRY, VOLUME 8: Proceedings of the Ninth International Temperature Symposium. ,vol. 1552, pp. 958- 963 ,(2013) , 10.1063/1.4821414
G. Machin, Twelve Years of High Temperature Fixed Point Research: A Review TEMPERATURE: ITS MEASUREMENT AND CONTROL IN SCIENCE AND INDUSTRY, VOLUME 8: Proceedings of the Ninth International Temperature Symposium. ,vol. 1552, pp. 305- 316 ,(2013) , 10.1063/1.4821383
Mohamed Sadli, Frédéric Bourson, Ahmet Diril, Christophe Journeau, Dave Lowe, Clemente Parga, Construction and in-situ characterisation of high-temperature fixed point cells devoted to industrial applications European Physical Journal Web of Conferences. ,vol. 77, pp. 00018- ,(2014) , 10.1051/EPJCONF/20147700018