Fundamental aspects of electropolishing
作者： D. Landolt
DOI: 10.1016/0013-4686(87)87001-9
关键词: Dissolution 、 Anode 、 Electropolishing 、 Rough surface 、 Metallurgy 、 Mass transport 、 Materials science 、 Electrochemistry 、 General Chemical Engineering
摘要: Abstract The literature on the mechanism of electropolishing is reviewed. A brief historical outline given and anodic levelling or macrosmoothing distinguished from brightening microsmoothing. Macrosmoothing results differences gradient electrical potential and/or concentration a rough surface. Its rate can be quantitatively predicted in many cases. Microsmoothing suppression crystallographic factors dissolution process. Optimum conditions are achieved when under mass transport control. role films pitting discussed.
elsevier.com
researchgate.net 
sci-hub.se 参考文章(65)
Henry Leidheiser, Allan T. Gwathmey, The Influence of Crystal Face on the Electrochemical Properties of a Single Crystal of Copper Transactions of The Electrochemical Society. ,vol. 91, pp. 95- 110 ,(1947) , 10.1149/1.3071769
Allan T. Gwathmey, Arthur F. Benton, Some Experiments Showing the Directional Reactivities of Single Crystals of Copper Transactions of the Electrochemical Society. ,vol. 77, pp. 211- 222 ,(1940) , 10.1149/1.3521198
K. Kojima, C. W. Tobias, Solution‐Side Transport Processes in the Electropolishing of Copper in Phosphoric Acid Journal of The Electrochemical Society. ,vol. 120, pp. 1026- 1033 ,(1973) , 10.1149/1.2403621
J. Deconinck, G. Maggetto, J. Vereecken, Calculation of Current Distribution and Electrode Shape Change by the Boundary Element Method Journal of The Electrochemical Society. ,vol. 132, pp. 2960- 2965 ,(1985) , 10.1149/1.2113701
C. Clerc, D. Landolt, On the theory of anodic levelling: FEM simulation of the influence of profile shape and cell geometry Electrochimica Acta. ,vol. 29, pp. 787- 795 ,(1984) , 10.1016/0013-4686(84)80015-8
Marie-Claude Petit, Etude des phenomenes aux electrodes au cours du polissage anodique du cuivre dans l'acide phosphorique☆ Electrochimica Acta. ,vol. 8, pp. 217- 226 ,(1963) , 10.1016/0013-4686(63)80021-3
Theodore R. Beck, David E. Rice, Conductivity of Anodic Silver Chloride during Formation Journal of The Electrochemical Society. ,vol. 131, pp. 89- 93 ,(1984) , 10.1149/1.2115552
C. Clerc, M. Datta, D. Landolt, On the theory of anodic levelling: model experiments with triangular nickel profiles in chloride solution Electrochimica Acta. ,vol. 29, pp. 1477- 1486 ,(1984) , 10.1016/0013-4686(84)87031-0
M. Datta, D. Landolt, On the influence of electrolyte concentration, pH and temperature on surface brightening of nickel under ECM conditions Journal of Applied Electrochemistry. ,vol. 7, pp. 247- 252 ,(1977) , 10.1007/BF00618992
J.B. Riggs, R.H. Muller, C.W. Tobias, Prediction of work piece geometry in electrochemical cavity sinking Electrochimica Acta. ,vol. 26, pp. 961- 969 ,(1981) , 10.1016/0013-4686(81)85064-5