New approach to 5-axis flank milling of free-form surfaces: Computation of adapted tool shape
作者： Julien Chaves-Jacob , Gérard Poulachon , Emmanuel Duc
DOI: 10.1016/J.CAD.2009.06.009
关键词: Mechanical engineering 、 Flank milling 、 Machining 、 Computation 、 Ruled surface 、 Engineering drawing 、 Engineering 、 Tool path 、 Free form
摘要: This paper develops a new approach to solve the problem of interferences during flank milling non-developable ruled surface. Many articles propose modify tool path reduce this problem. A novel is proposed here, Computation Adapted Tool Shape (CATS), which computes and optimizes shape these interferences. The aim CATS method maintain standard CAM system thanks modification. presented for machining an industrial part numerical experimental design nine surfaces.
acm.org
elsevier.com
sci-hub.se 参考文章(15)
Fritz Rehsteiner, H.J. Renker, Collision-Free Five-Axis Milling of Twisted Ruled Surfaces CIRP Annals. ,vol. 42, pp. 457- 461 ,(1993) , 10.1016/S0007-8506(07)62485-8
Xiong-Wei Liu, Five-axis NC cylindrical milling of sculptured surfaces Computer-aided Design. ,vol. 27, pp. 887- 894 ,(1995) , 10.1016/0010-4485(95)00005-4
Pierre-Yves Pechard, Christophe Tournier, Claire Lartigue, Jean-Pierre Lugarini, Geometrical deviations versus smoothness in 5-axis high-speed flank milling International Journal of Machine Tools & Manufacture. ,vol. 49, pp. 454- 461 ,(2009) , 10.1016/J.IJMACHTOOLS.2009.01.005
H.K. Tönshoff, Christoph Gey, Nils Rackow, Flank milling optimization - the flamingo project Air & Space Europe. ,vol. 3, pp. 60- 63 ,(2001) , 10.1016/S1290-0958(01)90058-9
Walter Rubio, Pierre Lagarrigue, Gilles Dessein, Fran�ois Pastor, Calculation of tool paths for a torus mill on free-form surfaces on five-axis machines with detection and elimination of interference The International Journal of Advanced Manufacturing Technology. ,vol. 14, pp. 13- 20 ,(1998) , 10.1007/BF01179412
Yuan-Shin Lee, Admissible tool orientation control of gouging avoidance for 5-axis complex surface machining Computer-aided Design. ,vol. 29, pp. 507- 521 ,(1997) , 10.1016/S0010-4485(97)00002-X
Hu Gong, Li-Xin Cao, Jian Liu, Improved positioning of cylindrical cutter for flank milling ruled surfaces Computer-aided Design. ,vol. 37, pp. 1205- 1213 ,(2005) , 10.1016/J.CAD.2004.11.006
L.N. López de Lacalle *, A. Lamikiz, J. Muñoa, J.A. Sánchez, The CAM as the centre of gravity of the five-axis high speed milling of complex parts International Journal of Production Research. ,vol. 43, pp. 1983- 1999 ,(2005) , 10.1080/00207540412331330129
Y.H. Jung, D.W. Lee, J.S. Kim, H.S. Mok, NC post-processor for 5-axis milling machine of table-rotating/tilting type Journal of Materials Processing Technology. ,vol. 130, pp. 641- 646 ,(2002) , 10.1016/S0924-0136(02)00725-2
E. Duc, C. Lartigue, C. Tournier, P. Bourdet, A New Concept for the Design and the Manufacturing of Free-Form Surfaces: The Machining Surface Cirp Annals-manufacturing Technology. ,vol. 48, pp. 103- 106 ,(1999) , 10.1016/S0007-8506(07)63141-2