A novel carbon nanofibre/phenolic nanocomposite coated polymer system for tailoring thermal behaviour
作者： Ehsan Bafekrpour , George P. Simon , Chunhui Yang , Mircea Chipara , Jana Habsuda
DOI: 10.1016/J.COMPOSITESA.2012.10.005
关键词: Composite material 、 Nanocomposite 、 Temperature gradient 、 Steady state 、 Polymer 、 Materials science 、 Heat capacity 、 Substrate (chemistry) 、 Thermal analysis 、 Thermal conductivity
摘要: Carbon nanofibre (CNF)/phenolic nanocomposite coatings were applied to the phenolic substrate for tailoring thermal behaviour under rapid temperature changes. A finite element (FE) model was developed in this work transient analysis of coated samples. The effects thickness and CNF content CNF/phenolic coating on reducing gradient field within samples as well time steady state investigated. Temperature-dependent properties including conductivity heat capacity its nanocomposites containing 2, 4 16 wt% experimentally determined employed FE analysis. results showed that polymers can significantly be decreased by using a coating.
core.ac.uk
elsevier.com
sci-hub.se 参考文章(38)
Ehsan Bafekrpour, George Simon, Minoo Naebe, Jana Habsuda, Chunhui Yang, Brownyn Fox, Composition-optimized synthetic graphite/polymer nanocomposites 70th Annual Technical Conference of the Society of Plastics Engineers 2012, ANTEC 2012 (Mark Spalding and Barbara Spain 2 April 2012 to 4 April 2012). ,vol. 1, pp. 437- 441 ,(2012)
Zhi-Cheng Tan, Ji-Biao Zhang, Meng Shang-He, A low-temperature automated adiabatic calorimeter : Heat capacities of high-purity graphite and polystyrene Journal of Thermal Analysis and Calorimetry. ,vol. 55, pp. 283- 289 ,(1999) , 10.1023/A:1010177331806
Maurizio Natali, Marco Monti, Debora Puglia, José Maria Kenny, Luigi Torre, None, Ablative properties of carbon black and MWNT/phenolic composites: A comparative study Composites Part A-applied Science and Manufacturing. ,vol. 43, pp. 174- 182 ,(2012) , 10.1016/J.COMPOSITESA.2011.10.006
Jun-Feng Su, Yun-Hui Zhao, Xin-Yu Wang, Hua Dong, Sheng-Bao Wang, Effect of interface debonding on the thermal conductivity of microencapsulated-paraffin filled epoxy matrix composites Composites Part A-applied Science and Manufacturing. ,vol. 43, pp. 325- 332 ,(2012) , 10.1016/J.COMPOSITESA.2011.12.003
Pinar Ugur, Cemail Aksel, The effect of SnO2 on the improvement of mechanical properties of MgO–MgAl2O4 composites Composites Part B-engineering. ,vol. 43, pp. 2217- 2221 ,(2012) , 10.1016/J.COMPOSITESB.2012.02.022
M Didem Bagci, M Kemal Apalak, None, Thermal Residual Stresses in One-Directional Functionally Graded Plates Subjected to In-Plane Heat Flux Numerical Heat Transfer Part A-applications. ,vol. 60, pp. 50- 83 ,(2011) , 10.1080/10407782.2011.588554
S. Feih, Z. Mathys, G. Mathys, A.G. Gibson, M. Robinson, A.P. Mouritz, Influence of water content on failure of phenolic composites in fire Polymer Degradation and Stability. ,vol. 93, pp. 376- 382 ,(2008) , 10.1016/J.POLYMDEGRADSTAB.2007.11.027
Nabarun Roy, Anil K. Bhowmick, In situ preparation, morphology and electrical properties of carbon nanofiber/polydimethylsiloxane nanocomposites Journal of Materials Science. ,vol. 47, pp. 272- 281 ,(2012) , 10.1007/S10853-011-5795-Y
Meng-Kao Yeh, Nyan-Hwa Tai, Yan-Jyun Lin, Mechanical properties of phenolic-based nanocomposites reinforced by multi-walled carbon nanotubes and carbon fibers Composites Part A-applied Science and Manufacturing. ,vol. 39, pp. 677- 684 ,(2008) , 10.1016/J.COMPOSITESA.2007.07.010
M YEH, T HSIEH, Dynamic properties of sandwich beams with MWNT/polymer nanocomposites as core materials Composites Science and Technology. ,vol. 68, pp. 2930- 2936 ,(2008) , 10.1016/J.COMPSCITECH.2007.10.010