Hydriding and dehydriding characteristics of Mg-LaNi5 composite materials prepared by mechanical alloying
作者： M Terzieva , M Khrussanova , P Peshev
DOI: 10.1016/S0925-8388(97)00556-2
关键词: Phase composition 、 Magnesium 、 Materials science 、 Kinetics 、 Metallurgy 、 Composite material 、 Composite number 、 Hydrogen 、 Hydrogen storage
摘要: Abstract The hydriding and dehydriding kinetics of composite materials with the nominal composition Mg– x wt.% LaNi 5 ( =10, 20, 30) prepared by mechanical alloying components in a planetary mill an acceleration 12 g have been investigated. It has shown that addition improves absorption–desorption characteristics magnesium towards hydrogen, best achievements belonging to containing 30 . data obtained on changes occurring phase samples as result hydrogen cycling available information from literature used explain behaviour during hydriding. Comparison results composites same other methods shows ensures preparation favourable kinetic which are hydrided under softest possible conditions.
elsevier.com
sci-hub.se 参考文章(23)
B. Vigeholm, J. Kjøller, B. Larsen, A.S. Pedersen, Formation and decomposition of magnesium hydride Journal of The Less Common Metals. ,vol. 89, pp. 135- 144 ,(1983) , 10.1016/0022-5088(83)90259-X
Zhou Ye, L.C. Erickson, B. Hjörvarsson, Hydride formation in MgZrFe1.4Cr0.6 composite material Journal of Alloys and Compounds. ,vol. 209, pp. 117- 124 ,(1994) , 10.1016/0925-8388(94)91085-5
Myoung-Youp Song, Hye-Ryoung Park, Hydriding kinetics of Mg2Ni below the polymorphic transformation temperature of Mg2NiH4 International Journal of Hydrogen Energy. ,vol. 20, pp. 805- 809 ,(1995) , 10.1016/0360-3199(94)00100-E
Hayao Imamura, Nozomu Sakasai, Yasuyuki Kajii, Hydrogen absorption of Mg-Based composites prepared by mechanical milling: Factors affecting its characteristics Journal of Alloys and Compounds. ,vol. 232, pp. 218- 223 ,(1996) , 10.1016/0925-8388(95)01882-4
Th. von Waldkirch, A. Seiler, P. Zürcher, H.J. Mathieu, Mg-based hydrogen storage materials: Surface segregation in Mg2Cu and related catalytic effects Materials Research Bulletin. ,vol. 15, pp. 353- 362 ,(1980) , 10.1016/0025-5408(80)90179-8
L. Schlapbach, D. Shaltiel, P. Oelhafen, Catalytic effect in the hydrogenation of Mg and Mg compounds: Surface analysis of MgMg2Ni and Mg2Ni Materials Research Bulletin. ,vol. 14, pp. 1235- 1246 ,(1979) , 10.1016/0025-5408(79)90220-4
Liang Guoxian, Wang Erde, Fang Shoushi, Hydrogen absorption and desorption characteristics of mechanically milled Mg35wt.%FeTi1.2 powders Journal of Alloys and Compounds. ,vol. 223, pp. 111- 114 ,(1995) , 10.1016/0925-8388(94)01465-5
M. Khrussanova, M. Terzieva, P. Peshev, I. Konstanchuk, E. Ivanov, Hydriding of mechanically alloyed mixtures of magnesium with MnO2, Fe2O3 and NiO Materials Research Bulletin. ,vol. 26, pp. 561- 567 ,(1991) , 10.1016/0025-5408(91)90098-7
S. Orimo, H. Fujii, M. Tabata, Synthesis of fine composite particles for hydrogen storage, starting from Mg-YNi2 mixture Journal of Alloys and Compounds. ,vol. 210, pp. 37- 43 ,(1994) , 10.1016/0925-8388(94)90112-0
F. H. Ellinger, C. E. Holley, B. B. McInteer, D. Pavone, R. M. Potter, E. Staritzky, W. H. Zachariasen, The Preparation and Some Properties of Magnesium Hydride1 Journal of the American Chemical Society. ,vol. 77, pp. 2647- 2648 ,(1955) , 10.1021/JA01614A094