The Effect of Preload on Failure Response of Glass-Epoxy Laminated Composite Bolted-Joints with Clearance:
作者： Murat Pakdil , Faruk Sen , Onur Sayman , Semih Benli
关键词: Materials science 、 Glass fiber 、 Bearing capacity 、 Preload 、 Failure mode and effects analysis 、 Composite number 、 Epoxy 、 Composite material 、 Edge (geometry) 、 Bolted joint 、 Structural engineering
摘要: In this study, the effect of preload moments on failure response glass-epoxy laminated composite bolted-joints with bolt/hole clearance was investigated. To evaluate effects bolted-joint geometry and stacking sequence plates bearing strength mode, parametric analyses were performed, experimentally. Two different geometrical parameters, edge distance-to-hole diameter ratio (E/D) plate width-to-hole (W/D), examined. For reason, E/D selected from 1 to 5, whereas W/D chosen 2 5. Besides, applied as 0, 3 6 Nm. Due estimating material parameters effect, oriented three groups, [0°/0°/90°/90°]s, [45°/45°/—45°/—45°]s [60°/60°/—60°/—60°]s, symmetrically. The experiments also performed under a for diameters bolt circular hole 5 mm, respectively. Experimental results showed that mode bea...
harvard.edu
sagepub.com
sci-hub.se 参考文章(13)
J. N. Reddy, Mechanics of laminated composite plates : theory and analysis ,(1996)
Liyong Tong, Bearing failure of composite bolted joints with non-uniform bolt-to-washer clearance Composites Part A-applied Science and Manufacturing. ,vol. 31, pp. 609- 615 ,(2000) , 10.1016/S1359-835X(99)00090-1
K Iꎬ Tserpes, G Labeas, P Papanikos, Th Kermanidis, None, Strength prediction of bolted joints in graphite/epoxy composite laminates Composites Part B-engineering. ,vol. 33, pp. 521- 529 ,(2002) , 10.1016/S1359-8368(02)00033-1
Alaattin Aktas, M.Husnu Dirikolu, The effect of stacking sequence of carbon epoxy composite laminates on pinned-joint strength Composite Structures. ,vol. 62, pp. 107- 111 ,(2003) , 10.1016/S0263-8223(03)00096-5
Marie-Laure Dano, Guy Gendron, André Picard, Stress and failure analysis of mechanically fastened joints in composite laminates Composite Structures. ,vol. 50, pp. 287- 296 ,(2000) , 10.1016/S0263-8223(00)00119-7
H.A Whitworth, M Othieno, O Barton, Failure analysis of composite pin loaded joints Composite Structures. ,vol. 59, pp. 261- 266 ,(2003) , 10.1016/S0263-8223(02)00056-9
Fu-Kuo Chang, The Effect of Pin Load Distribution on the Strength of Pin Loaded Holes in Laminated Composites Journal of Composite Materials. ,vol. 20, pp. 401- 408 ,(1986) , 10.1177/002199838602000407
Bülent Murat İçten, Ramazan Karakuzu, M. Evren Toygar, Failure analysis of woven kevlar fiber reinforced epoxy composites pinned joints Composite Structures. ,vol. 73, pp. 443- 450 ,(2006) , 10.1016/J.COMPSTRUCT.2005.02.016
Fu-Kuo Chang, Richard A. Scott, George S. Springer, Strength of Mechanically Fastened Composite Joints Journal of Composite Materials. ,vol. 16, pp. 470- 494 ,(1982) , 10.1177/002199838201600603
Bülent Murat İçten, Onur Sayman, Failure analysis of pin-loaded aluminum–glass–epoxy sandwich composite plates Composites Science and Technology. ,vol. 63, pp. 727- 737 ,(2003) , 10.1016/S0266-3538(02)00260-9