Effects of altitude and sample orientation on heat transfer for flame spread over polystyrene foams

作者: Xinjie Huang , Jie Zhao , Ying Zhang , Yang Zhou , Qingsong Wang

DOI: 10.1007/S10973-015-4615-Z

关键词: Composite materialOrientation (vector space)Heat transferAir entrainmentAnalytical chemistryFlame spreadMaterials scienceExtinction (optical mineralogy)X-ray photoelectron spectroscopyConvectionLimiting oxygen concentration

摘要: Experiments were carried out on insulation foams of EPS and XPS in a small-scale flame spread experimental bench the Tibetan plateau area Lhasa plain Hefei both China, respectively. The effects altitude sample orientation behavior quantitatively analyzed. results show that extinction secondary ignition occur for plateau, as oxygen concentration air entrainment is influenced by generated smoke pool fire zone. speed increases with incline angle Hefei, but (downward spread), decrease angle, especially Lhasa. It found heat transfer process different XPS. transition zone plays an important role over downward resulting total including convective radiative \( q_{\text{f}}^{\prime \prime } \delta_{\text{f}} \) conductive q_{\text{c}}^{\prime L increase while EPS, surface dominates two places.

参考文章(34)
James G. Quintiere, Fundamentals of Fire Phenomena ,(2006)
D.D. Drysdale, A.J.R. Macmillan, Flame spread on inclined surfaces Fire Safety Journal. ,vol. 18, pp. 245- 254 ,(1992) , 10.1016/0379-7112(92)90018-8
Xinlong Wang, Ye Song, Jianchun Bao, Synergistic effects of ZrO2 or B2O3 on flame‐retarded poly (butyl methacrylate) with tricresylphosphate Fire and Materials. ,vol. 34, pp. 357- 366 ,(2010) , 10.1002/FAM.1028
K.J. Overholt, M.J. Gollner, J. Perricone, A.S. Rangwala, F.A. Williams, Warehouse commodity classification from fundamental principles. Part II: Flame heights and flame spread Fire Safety Journal. ,vol. 46, pp. 317- 329 ,(2011) , 10.1016/J.FIRESAF.2011.05.002
Ying Zhang, Jie Ji, Qingsong Wang, Xinjie Huang, Qiuhong Wang, Jinhua Sun, Prediction of the critical condition for flame acceleration over wood surface with different sample orientations Combustion and Flame. ,vol. 159, pp. 2999- 3002 ,(2012) , 10.1016/J.COMBUSTFLAME.2012.04.007
Xuegui Wang, Xudong Cheng, Liming Li, Siuming Lo, Heping Zhang, Effect of ignition condition on typical polymer's melt flow flammability Journal of Hazardous Materials. ,vol. 190, pp. 766- 771 ,(2011) , 10.1016/J.JHAZMAT.2011.03.108
Y. Zhang, J.H. Sun, X.J. Huang, X.F. Chen, Heat transfer mechanisms in horizontal flame spread over wood and extruded polystyrene surfaces International Journal of Heat and Mass Transfer. ,vol. 61, pp. 28- 34 ,(2013) , 10.1016/J.IJHEATMASSTRANSFER.2013.01.069
Yang Zhou, Huahua Xiao, Weigang Yan, Weiguang An, Lin Jiang, Jinhua Sun, Horizontal Flame Spread Characteristics of Rigid Polyurethane and Molded Polystyrene Foams Under Externally Applied Radiation at Two Different Altitudes Fire Technology. ,vol. 51, pp. 1195- 1216 ,(2015) , 10.1007/S10694-014-0443-0
Qiyuan Xie, Heping Zhang, Ruibo Ye, Experimental study on melting and flowing behavior of thermoplastics combustion based on a new setup with a T-shape trough Journal of Hazardous Materials. ,vol. 166, pp. 1321- 1325 ,(2009) , 10.1016/J.JHAZMAT.2008.12.057
XJ Huang, QS Wang, Y Zhang, Y Yin, JH Sun, Thickness effect on flame spread characteristics of expanded polystyrene in different environments Journal of Thermoplastic Composite Materials. ,vol. 25, pp. 427- 438 ,(2012) , 10.1177/0892705711411341