Fabrication and mechanical properties of woven Al2O3 fibre – ZrO2 matrix minicomposite reinforced Al2O3 matrix composites by slurry infiltration – sintering process
作者： H. Kakisawa , T. Mamiya , S. Q. Guo , W. H. Liu , S. J. Zhu
DOI: 10.1179/174328413X13789824293902
关键词: Flexural strength 、 Materials science 、 Composite number 、 Ceramic matrix composite 、 Sintering 、 Composite material 、 Slurry 、 Ultimate tensile strength 、 Fabrication 、 Woven fabric
摘要: AbstractA plain woven Al2O3 fibre - ZrO2 minicomposite reinforced matrix composite ((Al2O3)f/ZrO2)mc/Al2O3) has been fabricated by a simple, pressureless, multiple slurry infiltration sintering process. The fabrication process consisted of two major steps: the ((Al2O3)f/ZrO2)mc) and ((Al2O3)f/ZrO2)mc/Al2O3. form ((Al2O3)f/ZrO2) mc was made dipping fabric into colloidal solution. Then powder dispersed infiltrated open spaces ((Al2O3) /ZrO2)mc. minicomposites were stacked, pressed, sintered in ambient air to plate optimum temperature ((Al2O3)f/ZrO2)mc/Al2O3 investigated via tensile strength density. Tensile behaviour fracture resistance under processing condition evaluated. stress ...
sci-hub.se 参考文章(21)
H. Kakisawa, Y. Kagawa, Effect of Abrasive Wear on Interfacial Shear Sliding Resistance in Sic Fiber‐Reinforced Al2O3 Matrix Composite John Wiley & Sons, Ltd. pp. 757- 762 ,(2008) , 10.1002/9780470294437.CH82
M. G. Jenkins, Sean S. Kohles, High‐Temperature Performance and Retained Strength of an Oxide‐Oxide Continuous Fibre Ceramic Composite Proceedings of the 1998 22nd Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: A. Part 1 (of 2). ,vol. 19, pp. 317- 325 ,(2008) , 10.1002/9780470294482.CH35
D. M. Wilson, S. L. Lieder, D. C. Lueneburg, Microstructure and High Temperature Properties of Nextel 720 Fibers Proceedings of the 19th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures—B: Ceramic Engineering and Science Proceedings, Volume 16, Issue 5. pp. 1005- 1014 ,(2008) , 10.1002/9780470314784.CH44
Christian X. Campbell, Michael G. Jenkins, In‐Situ Determination of Constituent Properties and Performance in an Oxide‐Oxide CFCC John Wiley & Sons, Ltd. pp. 545- 554 ,(2008) , 10.1002/9780470294567.CH62
O. Sudre, A. G. Razzell, L. Molliex, M. Holmquist, Alumina Single‐Crystal Fibre Reinforced Alumina Matrix for Combustor Tiles John Wiley & Sons, Ltd. pp. 273- 280 ,(2010) , 10.1002/9780470294499.CH31
Larry P. Zawada, Longitudinal and Transthickness Tensile Behavior of Several Oxide/Oxide Composites 22nd Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: A: Ceramic Engineering and Science Proceedings, Volume 19, Issue 3. pp. 327- 339 ,(2008) , 10.1002/9780470294482.CH36
T. Mamiya, Y. Kagawa, T. Nakayasu, M. Sato, T. Yamamura, Damage Tolerance of Coating Free SiTiCO (Tyranno®) SiC Matrix Composites John Wiley & Sons, Ltd. pp. 631- 636 ,(2008) , 10.1002/9780470294567.CH72
T. Mah, K. Keller, T. A. Parthasarathy, J. Guth, Fugitive Interface Coating in Oxide‐Oxide Composites: A Viability Study John Wiley & Sons, Ltd. pp. 1802- 1815 ,(2008) , 10.1002/9780470313848.CH14
C. Milz, J. Goering, H. Schneider, Mechanical and Microstructural Properties of Nextel™ 720 Relating to its Suitability for High Temperature Application in CMCs John Wiley & Sons, Ltd. pp. 191- 198 ,(2008) , 10.1002/9780470294567.CH23
Carlos G. Levi, James Y. Yang, Brian J. Dalgleish, Frank W. Zok, Anthony G. Evans, Processing and Performance of an All‐Oxide Ceramic Composite Journal of the American Ceramic Society. ,vol. 81, pp. 2077- 2086 ,(2005) , 10.1111/J.1151-2916.1998.TB02590.X