Experimental and numerical investigations in electro-chemical milling
作者： S. Hinduja , J. Pattavanitch
DOI: 10.1016/J.CIRPJ.2015.07.003
关键词: Engineering 、 Structural engineering 、 Machining 、 Machining process 、 Boundary element method 、 Simple Features 、 Chemical milling 、 Square (algebra) 、 Process (computing)
摘要: Abstract This paper presents experimental and numerical investigations into electro-chemical (EC) milling of simple features such as slots pockets. Preliminary the machining a slot enabled appropriate process parameters to be selected; these were then used machine square pocket finally with human-being shaped protrusion. These machined tools having circular cross-sections. The protrusion was tool paths zig–zag contour-parallel type. results indicated that accuracy depends upon, amongst other things, on shape parameters. A boundary element EC predict pockets in most cases, predicted shapes compared favourably actual features.
core.ac.uk
elsevier.com
sci-hub.se 参考文章(18)
Johan Deconinck, Current Distributions and Electrode Shape Changes in Electrochemical Systems ,(1992)
Martin Held, On the Computational Geometry of Pocket Machining ,(1991)
J. A. McGeough, Principles of electrochemical machining ,(1974)
Zhaoqi Zeng, Yukui Wang, Zhenlong Wang, Debin Shan, Xiaolong He, A study of micro-EDM and micro-ECM combined milling for 3D metallic micro-structures Precision Engineering-journal of The International Societies for Precision Engineering and Nanotechnology. ,vol. 36, pp. 500- 509 ,(2012) , 10.1016/J.PRECISIONENG.2012.01.005
Bo Hyun Kim, Shi Hyoung Ryu, Deok Ki Choi, Chong Nam Chu, Micro electrochemical milling Journal of Micromechanics and Microengineering. ,vol. 15, pp. 124- 129 ,(2005) , 10.1088/0960-1317/15/1/019
W. Vanderauwera, M. Vanloffelt, R. Perez, B. Lauwers, Investigation on the performance of macro electrochemical milling Procedia CIRP. ,vol. 6, pp. 356- 361 ,(2013) , 10.1016/J.PROCIR.2013.03.025
S Hinduja, M S A Mansor, O O Owodunni, Voronoi-diagram-based linking of contour-parallel tool paths for two-and-a-half-dimensional closed-pocket machining Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ,vol. 224, pp. 1329- 1350 ,(2010) , 10.1243/09544054JEM1596
O.H. Narayanan, S. Hinduja, C.F. Noble, The prediction of workpiece shape during electrochemical machining by the boundary element method International Journal of Machine Tool Design and Research. ,vol. 26, pp. 323- 338 ,(1986) , 10.1016/0020-7357(86)90009-0
Jerzy Kozak, Maria Chuchro, Adam Ruszaj, Krzysztof Karbowski, The computer aided simulation of electrochemical process with universal spherical electrodes when machining sculptured surfaces Journal of Materials Processing Technology. ,vol. 107, pp. 283- 287 ,(2000) , 10.1016/S0924-0136(00)00697-X
R. C. Hewson-Browne, Further applications of complex variable methods to electrochemical machining problems Journal of Engineering Mathematics. ,vol. 5, pp. 233- 240 ,(1971) , 10.1007/BF01535110