Analysis of thermal behavior during equal channel multi-angular pressing by the 3-dimensional finite volume method
作者： Hyoung Seop Kim , None
DOI: 10.1016/J.MSEA.2008.01.100
关键词: AZ31 alloy 、 Heat transfer 、 Thermal 、 Metallurgy 、 Pressing 、 Severe plastic deformation 、 Composite material 、 Finite volume method 、 Communication channel 、 Friction factor 、 Materials science 、 Mechanical engineering 、 General Materials Science 、 Mechanics of Materials 、 Condensed matter physics
摘要: Abstract Thermal behavior and heat transfer during equal channel multi-angular pressing process of AZ31 alloy at room temperature were analyzed by using the 3-dimensional finite volume method. The simulations carried out different frictional conditions (friction factor m = 0, 0.1 0.2), speeds (v = 2 20 mm/s), routes (A, B C). speed influences more on rise sample than route friction condition. initial 293 K was increased up to 395 K for 20 mm/s pressing.
elsevier.com
sci-hub.se 参考文章(21)
Investigations and applications of severe plastic deformation Kluwer Academic Publishers. ,(2000) , 10.1007/978-94-011-4062-1
V.M. Segal, Materials processing by simple shear Materials Science and Engineering: A. ,vol. 197, pp. 157- 164 ,(1995) , 10.1016/0921-5093(95)09705-8
Jae-Chul Lee, Hyun-Kwang Seok, Jun-Hyun Han, Young-Hoon Chung, Controlling the textures of the metal strips via the continuous confined strip shearing(C2S2) process Materials Research Bulletin. ,vol. 36, pp. 997- 1004 ,(2001) , 10.1016/S0025-5408(01)00557-8
R. Z. Valiev, Developing SPD methods for processing bulk nanostructured materials with enhanced properties Metals and Materials International. ,vol. 7, pp. 413- 420 ,(2001) , 10.1007/BF03027081
Y. Saito, H. Utsunomiya, N. Tsuji, T. Sakai, Novel ultra-high straining process for bulk materials—development of the accumulative roll-bonding (ARB) process Acta Materialia. ,vol. 47, pp. 579- 583 ,(1999) , 10.1016/S1359-6454(98)00365-6
Hyoung Seop Kim, Min Hong Seo, Sun Ig Hong, On the die corner gap formation in equal channel angular pressing Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 291, pp. 86- 90 ,(2000) , 10.1016/S0921-5093(00)00970-9
Y Fukuda, K Oh-ishi, Z Horita, T.G Langdon, Processing of a low-carbon steel by equal-channel angular pressing Acta Materialia. ,vol. 50, pp. 1359- 1368 ,(2002) , 10.1016/S1359-6454(01)00441-4
Hyoung Seop Kim, Sun Ig Hong, Young Shin Lee, Anna A Dubravina, Igor V Alexandrov, None, Deformation behavior of copper during a high pressure torsion process Journal of Materials Processing Technology. ,vol. 142, pp. 334- 337 ,(2003) , 10.1016/S0924-0136(03)00590-9
Y Saito, H Utsunomiya, H Suzuki, T Sakai, Improvement in the r-value of aluminum strip by a continuous shear deformation process Scripta Materialia. ,vol. 42, pp. 1139- 1144 ,(2000) , 10.1016/S1359-6462(00)00349-3
Y.H Kim, J.R Cho, K.S Kim, H.S Jeong, S.S Yoon, A study of the application of upper bound method to the CONFORM process Journal of Materials Processing Technology. ,vol. 97, pp. 153- 157 ,(2000) , 10.1016/S0924-0136(99)00366-0