A combination of severe plastic deformation and ageing phenomena in Al–Mg–Si Alloys
作者： Majid Vaseghi , Hyoung Seop Kim , None
DOI: 10.1016/J.MATDES.2011.12.014
关键词: Pressing 、 Solution treatment 、 Strain rate 、 Vickers hardness test 、 Die (manufacturing) 、 Materials science 、 Metallurgy 、 Ageing 、 Severe plastic deformation
摘要: Abstract In this paper static and dynamic strain ageing behavior in Al–Mg–Si alloys related to equal channel angular pressing (ECAP) was investigated. order examine the combined plastic deformation, solution treatment effects on strengthening characteristics, experimental results of without ECAP, pre-ECAP ageing, post-ECAP inside ECAP die were compared. particular, temperature, time, rate sequence heat Vickers hardness discussed. To achieve a higher hardness, an optimum cycle with process is presented based current study. By employing proposed schedule value increased from 86 HV (as-solution treatment) 138 (peak schedule).
elsevier.com
sci-hub.se 参考文章(22)
H. E. Kissinger, Reaction Kinetics in Differential Thermal Analysis Analytical Chemistry. ,vol. 29, pp. 1702- 1706 ,(1957) , 10.1021/AC60131A045
W. J. Kim, J. K. Kim, T. Y. Park, S. I. Hong, D. I. Kim, Y. S. Kim, J. D. Lee, Enhancement of strength and superplasticity in a 6061 Al alloy processed by equal-channel-angular-pressing Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 33, pp. 3155- 3164 ,(2002) , 10.1007/S11661-002-0301-4
Jens C. Werenskiold, Hans J. Roven, Microstructure and texture evolution during ECAP of an AlMgSi alloy: Observations, mechanisms and modeling Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 410, pp. 174- 177 ,(2005) , 10.1016/J.MSEA.2005.08.049
Cheng Xu, Minoru Furukawa, Zenji Horita, Terence G Langdon, Using ECAP to achieve grain refinement, precipitate fragmentation and high strain rate superplasticity in a spray-cast aluminum alloy Acta Materialia. ,vol. 51, pp. 6139- 6149 ,(2003) , 10.1016/S1359-6454(03)00433-6
Hyoung Seop Kim, None, Analysis of thermal behavior during equal channel multi-angular pressing by the 3-dimensional finite volume method Materials Science and Engineering: A. ,vol. 503, pp. 130- 136 ,(2009) , 10.1016/J.MSEA.2008.01.100
A.V. Nagasekhar, S.C. Yoon, Y. Tick-Hon, H.S. Kim, An experimental verification of the finite element modelling of equal channel angular pressing Computational Materials Science. ,vol. 46, pp. 347- 351 ,(2009) , 10.1016/J.COMMATSCI.2009.03.018
Giuliano Angella, Paola Bassani, Ausonio Tuissi, Maurizio Vedani, Intermetallic particle evolution during ECAP processing of a 6082 alloy Materials Transactions. ,vol. 45, pp. 2182- 2186 ,(2004) , 10.2320/MATERTRANS.45.2182
V.V Stolyarov, R Lapovok, I.G Brodova, P.F Thomson, Ultrafine-grained Al–5 wt.% Fe alloy processed by ECAP with backpressure Materials Science and Engineering: A. ,vol. 357, pp. 159- 167 ,(2003) , 10.1016/S0921-5093(03)00215-6
Majid Vaseghi, Ali Karimi Taheri, Hyoung Seop Kim, None, Upper bound analysis of deformation and dynamic ageing behavior in elevated temperature equal channel angular pressing of Al-Mg-Si alloys Metals and Materials International. ,vol. 16, pp. 363- 369 ,(2010) , 10.1007/S12540-010-0604-8
D. L. Zhang, L. Zheng, The quench sensitivity of cast Al-7 wt pct Si-0.4 wt pct Mg alloy Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 27, pp. 3983- 3991 ,(1996) , 10.1007/BF02595647