Brazing of micrograin-filled quartz fiber reinforced silica composites and Invar using Ag-21Cu-4.5Ti alloy
作者： Lei Zhao , JiCai Feng , XiaoYu Tian , LiXia Zhang , Peng He
DOI: 10.1007/S11434-011-4569-X
关键词: Materials science 、 Composite material 、 Wetting 、 Alloy 、 Metallurgy 、 Shear strength 、 Metal 、 Microstructure 、 Invar 、 Brazing 、 Nickel titanium 、 Multidisciplinary
摘要: Brazing of quartz fiber reinforced silica composites (QFSC) to Invar alloy was carried out in a vacuum at 1173 K for 10 min using Ag-21Cu-4.5Ti metal filler. Experiments indicated that prefilled with CaCO3 micrograins had good wettability. The decomposed CaO during brazing. After brazing, joint structure QFSC/3CaO·2SiO2+Ti3O5+Fe2Ti+NiTi+Ag(s,s)+ Cu(s,s)/Invar established. shear strength the brazed reached 11.6 MPa room temperature, which is about five times obtained without surface filling.
springer.com
harvard.edu
paperity.org
core.ac.uk 参考文章(17)
A.M Kliauga, D Travessa, M Ferrante, Al2O3/Ti interlayer/AISI 304 diffusion bonded joint Materials Characterization. ,vol. 46, pp. 65- 74 ,(2001) , 10.1016/S1044-5803(00)00095-4
Miao Shui, Polymer surface modification and characterization of particulate calcium carbonate fillers Applied Surface Science. ,vol. 220, pp. 359- 366 ,(2003) , 10.1016/S0169-4332(03)00866-3
Isaac M. Daniel, Jyi-Jiin Luo, Patrick M. Schubel, Three-dimensional characterization of textile composites Composites Part B-engineering. ,vol. 39, pp. 13- 19 ,(2008) , 10.1016/J.COMPOSITESB.2007.02.002
Zheng Chen, M.S Cao, Q.Z Zhao, J.S Zou, Interfacial microstructure and strength of partial transient liquid-phase bonding of silicon nitride with Ti/Ni multi-interlayer Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 380, pp. 394- 401 ,(2004) , 10.1016/J.MSEA.2004.04.012
S Dash, M Kamruddin, P.K Ajikumar, A.K Tyagi, Baldev Raj, Nanocrystalline and metastable phase formation in vacuum thermal decomposition of calcium carbonate Thermochimica Acta. ,vol. 363, pp. 129- 135 ,(2000) , 10.1016/S0040-6031(00)00604-3
Bohong Gu, Fu-Kuo Chang, Energy absorption features of 3-D braided rectangular composite under different strain rates compressive loading Aerospace Science and Technology. ,vol. 11, pp. 535- 545 ,(2007) , 10.1016/J.AST.2007.03.004
M SINGH, R ASTHANA, Characterization of brazed joints of C-C composite to Cu-clad-Molybdenum Composites Science and Technology. ,vol. 68, pp. 3010- 3019 ,(2008) , 10.1016/J.COMPSCITECH.2008.06.012
B Alince, F Bednar, T.G.M van de Ven, Deposition of calcium carbonate particles on fiber surfaces induced by cationic polyelectrolyte and bentonite Colloids and Surfaces A: Physicochemical and Engineering Aspects. ,vol. 190, pp. 71- 80 ,(2001) , 10.1016/S0927-7757(01)00666-5
C.H. Henager, Y. Shin, Y. Blum, L.A. Giannuzzi, B.W. Kempshall, S.M. Schwarz, Coatings and joining for SiC and SiC-composites for nuclear energy systems Journal of Nuclear Materials. ,vol. 367, pp. 1139- 1143 ,(2007) , 10.1016/J.JNUCMAT.2007.03.189
Guifeng Zhang, Jianxun Zhang, Yi Pei, Siyu Li, Donglang Chai, Joining of Al2O3p/Al composites by transient liquid phase (TLP) bonding and a novel process of active-transient liquid phase (A-TLP) bonding Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 488, pp. 146- 156 ,(2008) , 10.1016/J.MSEA.2007.11.084