Joining of Zirconia Ceramic to Stainless Steel and to Itself Using Ag57Cu38Ti5 Filler Metal
作者： Hongqi Hao , Yonglan Wang , Zhihao Jin , Xiaotian Wang
DOI: 10.1111/J.1151-2916.1995.TB08629.X
关键词: Shear strength 、 Cubic zirconia 、 Titanium alloy 、 Microstructure 、 Filler metal 、 Brazing 、 Metallurgy 、 Ceramic 、 Materials science 、 Layer (electronics)
摘要: The brazing of ZrO2 ceramic to 1Cr18Ni9Ti stainless steel and itself was performed using Ag57Cu38Ti5 filler metal under a vacuum 7 × 10-3 Pa. effects interlayer copper on the joint strength, temperature (1073 1323 K) holding time (0 60 min) strength were investigated. evaluated by shear testing. An interfacial reaction layer between found, products δ-TiO γ-AgTi3. improved suitable thickness. had strong influence ceramic, mainly controlled thickness properties products. maximum obtained for at 1123 K 30 min an ∼4.4 μm.
sci-hub.se 参考文章(10)
MICHAEL L. SANTELLA, Brazing of titanium-vapor-coated silicon nitride Advanced Ceramic Materials. ,vol. 3, pp. 457- 462 ,(1988) , 10.1111/J.1551-2916.1988.TB00256.X
P. Kritsalis, L. Coudurier, N. Eustathopoulos, Contribution to the study of reactive wetting in the CuTi/Al2O3 system Journal of Materials Science. ,vol. 26, pp. 3400- 3408 ,(1991) , 10.1007/BF01124693
Katsuaki Suganuma, Taira Okamoto, Mitsue Koizumi, Masahiko Shimada, Effect of Thickness on Direct Bonding of Silicon Nitride to Steel Journal of the American Ceramic Society. ,vol. 68, ,(1985) , 10.1111/J.1151-2916.1985.TB10139.X
Ai -Ping Xian, Zhong -Yao Si, Interlayer design for joining pressureless sintered sialon ceramic and 40Cr steel brazing with Ag57Cu38Ti5 filler metal Journal of Materials Science. ,vol. 27, pp. 1560- 1566 ,(1992) , 10.1007/BF00542918
T. Yamada, K. Yokoi, A. Kohno, Effect of residual stress on the strength of alumina-steel joint with Al-Si interlayer Journal of Materials Science. ,vol. 25, pp. 2188- 2192 ,(1990) , 10.1007/BF01045788
H.C Cao, M.D Thouless, A.G Evans, Residual stresses and cracking in brittle solids bonded with a thin ductile layer Acta Metallurgica. ,vol. 36, pp. 2037- 2046 ,(1988) , 10.1016/0001-6160(88)90305-7
D. H. Kim, S. H. Hwang, S. S. Chun, The wetting, reaction and bonding of silicon nitride by Cu-Ti alloys Journal of Materials Science. ,vol. 26, pp. 3223- 3234 ,(1991) , 10.1007/BF01124666
G. ECONOMOS, W. D. KINGERY, Metal-Ceramic Interactions: II, Metal-Oxide Interfacial Reactions at Elevated Temperatures Journal of the American Ceramic Society. ,vol. 36, pp. 403- 409 ,(1953) , 10.1111/J.1151-2916.1953.TB12829.X
Ai-Ping Xian, Zhong-Yao Si, Residual stress in a soft-buffer-inserted metal/ceramic joint Journal of the American Ceramic Society. ,vol. 73, pp. 3462- 3465 ,(1990) , 10.1111/J.1151-2916.1990.TB06476.X
H.C Cho, Jin Yu, Effects of brazing temperature on the fracture toughness of Al2O3/Ag-Cu-0.5Ti joints Scripta Metallurgica Et Materialia. ,vol. 26, pp. 797- 802 ,(1992) , 10.1016/0956-716X(92)90441-G