Physical test data for the appraisal of design procedures for bolted joints in pultruded FRP structural shapes and systems
作者： J T Mottram , G J Turvey
DOI: 10.1002/PSE.154
关键词: Bolted joint 、 Test data 、 Engineering 、 Joint (geology) 、 Fibre-reinforced plastic 、 Physical test 、 Structural engineering 、 Adhesive bonding 、 Pultrusion 、 Lap joint
摘要: A review is presented of the tests undertaken to characterize bolted joints (no adhesive bonding) for pultruded fibre-reinforced plastic (PFRP) structural shapes and systems. The written with regard appraisal existing connection design procedures plate-to-plate joints. It shown that 15 uncoordinated series on single-bolt multi-bolt double lap provide 800 ultimate strength results. Each had different objectives so joint variables were studied. This reflects current state guidance installation in pultruders' manuals elsewhere, which be limited inconsistent. By rationalizing number authors have tested a further 900 order generate larger database strengths modes failure, may used appraise procedures, such as Hart-Smith EUROCOMP Design Code Handbook simplified rigorous methods. Observations are made findings from 16 respect PFRP
core.ac.uk
researchgate.net 
sci-hub.se 参考文章(19)
L. J. Hart-Smith, Mechanically-Fastened Joints for Advanced Composites — Phenomenological Considerations and Simple Analyses Fibrous Composites in Structural Design. pp. 543- 574 ,(1980) , 10.1007/978-1-4684-1033-4_32
Geoffrey J. Turvey, P. Wang, Single bolt tension joints in pultruded GRP material – effect of elevated temperature on failure loads and strengths and joint efficiency. ,(2001)
Gibbs Cox, Marine design manual for fiberglass reinforced plastics ,(2011)
R Prabhakaran, J Robertson, AN EXPERIMENTAL INVESTIGATION OF LOAD-SHARING IN A MULTI-BOLT PULTRUDED COMPOSITE JOINT Second International Conference on Composites in InfrastructureNational Science Foundation. ,vol. 2, ,(1998)
John Lowther Clarke, Structural design of polymer composites : EUROCOMP design code and handbook Published in <b>1996</b> in New York by Spon. ,(1996)
S. Ramakrishna, H. Hamada, M. Nishiwaki, Bolted joints of pultruded sandwich composite laminates Composite Structures. ,vol. 32, pp. 227- 235 ,(1995) , 10.1016/0263-8223(95)00031-3
GJ Turvey, Bolted connections in PFRP structures. Progress in Structural Engineering and Materials. ,vol. 2, pp. 146- 156 ,(2000) , 10.1002/1528-2716(200004/06)2:2<146::AID-PSE18>3.0.CO;2-0
R. Prabhakaran, Z. Razzaq, S. Devara, Load and resistance factor design (LRFD) approach for bolted joints in pultruded composites Composites Part B: Engineering. ,vol. 27, pp. 351- 360 ,(1996) , 10.1016/1359-8368(95)00021-6
M. A. Erki, Bolted glass-fibre-reinforced plastic joints Canadian Journal of Civil Engineering. ,vol. 22, pp. 736- 744 ,(1995) , 10.1139/L95-084
Nahla K. Hassan, Mohamed A. Mohamedien, Sami H. Rizkalla, RATIONAL MODEL FOR MULTIBOLTED CONNECTIONS FOR GFRP MEMBERS Journal of Composites for Construction. ,vol. 1, pp. 71- 78 ,(1997) , 10.1061/(ASCE)1090-0268(1997)1:2(71)