Circuit which can be programmed using a resistor and which has a reference current source
作者： Wolfgang Horchler , Salvatore Pastorina
DOI:
关键词: Current mirror 、 Current sensor 、 Voltage reference 、 LED circuit 、 Electronic engineering 、 Engineering 、 Widlar current source 、 Terminal (electronics) 、 Voltage source 、 0-10 V lighting control
摘要: A circuit configured to be programmed using a resistor includes an output terminal, reference voltage source, first circuit, and current mirror arrangement. The terminal is connected programming resistor. source generate on the terminal. measurement evaluation detect control signal which dependent current. arrangement coupled path containing provides signal.
lens.org 参考文章(17)
Todd K. Moyer, On-chip termination circuit ,(2000)
Peter J. Meier, Gordon W. Motley, David S. Maitland, Method of programming a desired source resistance for a driver stage ,(1995)
Xiaobao Wang, Tzung-Chin Chang, Chiakang Sung, Khai Q. Nguyen, On-chip termination with calibrated driver strength ,(2005)
Huy M. Nguyen, Vijay Gadde, Benedict Lau, Calibration methods and circuits for optimized on-die termination ,(2003)
Uk-Rae Cho, Nam-Seog Kim, Impedance control circuit ,(2001)
Gregory F. Taylor, Jack A. Price, Chee How Lim, On-chip termination ,(1999)
Chao-Cheng Lee, An-Ming Lee, Impedance matching circuit with automatic adjustment and method thereof ,(2002)
Christopher Jonathan Bostak, Samuel D. Naffziger, William P. Repasky, Systems and methods for generating a current ,(2003)
Hideo Nagano, Takahiro Miki, Impedance adjustment circuit ,(2001)