Fuzzy Logic Model for Prediction of Properties of Fiber Reinforced Self-compacting Concrete
作者： Osman GENCEL , Cengiz OZEL , Fuat KOKSAL , Gonzalo MARTÍNEZ-BARRERA , Witold BROSTOW
关键词: Fly ash 、 Composite material 、 Cement 、 Polypropylene 、 Fuzzy logic 、 Superplasticizer 、 Materials science 、 Fiber
摘要: A fuzzy logic prediction model for fresh and hardened properties of self-compacting concrete (SCC) containingfly ash polypropylene fibers has been developed. Materials studied experimentally contained 0 %, 10 %, 20 % 30 wt. % fly replacing cement, with four fiber contents at 3, 6, 9 12 kg/m3 in each concrete. Water/cement ratio superplasticizer content were kept constant 0.40 % 1.0 % cement content, respectively. In our models, containing fibers, predicted as well a function time concrete.The results obtained from the compared average experiments found to be remarkably close one another. Polypropylene provide reinforcement, use lowers environmental contamination, while satisfactory are obtained.DOI: http://dx.doi.org/10.5755/j01.ms.19.2.4439
sci-hub.se 参考文章(34)
Lotfi A. Zadeh, Janusz Kacprzyk, Fuzzy Logic for the Management of Uncertainty ,(1992)
High-Performance Fiber-Reinforced Concrete Mixture Proportions with High Fiber Volume Fractions Aci Materials Journal. ,vol. 101, pp. 281- 286 ,(2004) , 10.14359/13361
Halit Yazıcı, The effect of silica fume and high-volume Class C fly ash on mechanical properties, chloride penetration and freeze–thaw resistance of self-compacting concrete Construction and Building Materials. ,vol. 22, pp. 456- 462 ,(2008) , 10.1016/J.CONBUILDMAT.2007.01.002
Wei Wang, Sigang Wu, Hongzhe Dai, Fatigue behavior and life prediction of carbon fiber reinforced concrete under cyclic flexural loading Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 434, pp. 347- 351 ,(2006) , 10.1016/J.MSEA.2006.07.080
S. Dalle Vacche, C. J. G. Plummer, C. Houphouët-Boigny, J.-A. E. Månson, Morphology and mechanical properties of isotactic polypropylene glass mat thermoplastic composites modified with organophilic montmorillonite Journal of Materials Science. ,vol. 46, pp. 2112- 2122 ,(2011) , 10.1007/S10853-010-5047-6
Gonzalo Martínez-Barrera, Ana Laura Martínez-Hernández, Carlos Velasco-Santos, Witold Brostow, Polymer concretes improved by fiber reinforcement and gamma irradiation E-polymers. ,vol. 9, pp. 1236- 1249 ,(2009) , 10.1515/EPOLY.2009.9.1.1236
Abdulkadir Cüneyt Aydin, Self compactability of high volume hybrid fiber reinforced concrete Construction and Building Materials. ,vol. 21, pp. 1149- 1154 ,(2007) , 10.1016/J.CONBUILDMAT.2006.11.017
Harun Tanyildizi, Fuzzy logic model for the prediction of bond strength of high-strength lightweight concrete Advances in Engineering Software. ,vol. 40, pp. 161- 169 ,(2009) , 10.1016/J.ADVENGSOFT.2007.05.013
Osman Gencel, Witold Brostow, Tea Datashvili, Michael Thedford, Workability and Mechanical Performance of Steel Fiber-Reinforced Self-Compacting Concrete with Fly Ash Composite Interfaces. ,vol. 18, pp. 169- 184 ,(2011) , 10.1163/092764411X567567
M. Kakemi, D.J. Hannant, Effect of autoclaving on cement composites containing polypropylene, glass and carbon fibres Cement & Concrete Composites. ,vol. 18, pp. 61- 66 ,(1996) , 10.1016/0958-9465(96)00001-7