Experimental investigation of FDM process for improvement of mechanical properties and production cost
作者： Ismail Durgun , Rukiye Ertan
关键词: Surface finish 、 Materials science 、 Fracture (geology) 、 Rapid prototyping 、 Perpendicular 、 Raster graphics 、 Surface roughness 、 Ultimate tensile strength 、 Flexural strength 、 Composite material
摘要: Purpose – The mechanical properties and surface finish of functional parts are important consideration in rapid prototyping, the selection proper parameters is essential to improve manufacturing solutions. purpose this paper describe how manufactured by fused deposition modelling (FDM), with different part orientations raster angles, were examined experimentally evaluated achieve desired while shortening times due maintenance costs. Design/methodology/approach For purpose, five angles (0°, 30°, 45°, 60° 90°) for three (horizontal, vertical perpendicular) have been FDM method tested roughness, tensile strength flexural strength. Also, behaviour was clarified scanning electron microscopy images fracture surfaces. Findings research results suggest that orientation has a more significant in...
emeraldinsight.com参考文章(17)
Miquel Domingo-Espin, Josep M. Puigoriol-Forcada, Andres-Amador Garcia-Granada, Jordi Llumà, Salvador Borros, Guillermo Reyes, Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts Materials & Design. ,vol. 83, pp. 670- 677 ,(2015) , 10.1016/J.MATDES.2015.06.074
Ashu Garg, Anirban Bhattacharya, Ajay Batish, On Surface Finish and Dimensional Accuracy of FDM Parts after Cold Vapor Treatment Materials and Manufacturing Processes. ,vol. 31, pp. 522- 529 ,(2016) , 10.1080/10426914.2015.1070425
K Thrimurthulu, Pulak M Pandey, N Venkata Reddy, Optimum part deposition orientation in fused deposition modeling International Journal of Machine Tools & Manufacture. ,vol. 44, pp. 585- 594 ,(2004) , 10.1016/J.IJMACHTOOLS.2003.12.004
L.M. Galantucci, F. Lavecchia, G. Percoco, Quantitative analysis of a chemical treatment to reduce roughness of parts fabricated using fused deposition modeling CIRP Annals. ,vol. 59, pp. 247- 250 ,(2010) , 10.1016/J.CIRP.2010.03.074
Sung‐Hoon Ahn, Michael Montero, Dan Odell, Shad Roundy, Paul K. Wright, Anisotropic material properties of fused deposition modeling ABS Rapid Prototyping Journal. ,vol. 8, pp. 248- 257 ,(2002) , 10.1108/13552540210441166
José F. Rodríguez, James P. Thomas, John E. Renaud, Mechanical behavior of acrylonitrile butadiene styrene fused deposition materials modeling Rapid Prototyping Journal. ,vol. 9, pp. 219- 230 ,(2003) , 10.1108/13552540310489604
Pulak M Pandey, N Venkata Reddy, Sanjay G Dhande, Improvement of surface finish by staircase machining in fused deposition modeling Journal of Materials Processing Technology. ,vol. 132, pp. 323- 331 ,(2003) , 10.1016/S0924-0136(02)00953-6
Saeed A Jortani, Toxicogenomics: Principles and Applications. Hisham K. Hamadeh and Cynthia A. Afshari. Hoboken, NJ: John Wiley and Sons, Inc., 361 pp., $64.95, hardcover. ISBN 0-417-43417-5. Clinical Chemistry. ,vol. 51, pp. 1568- 1568 ,(2005) , 10.1373/CLINCHEM.2004.043430
D.T Pham, R.S Gault, A comparison of rapid prototyping technologies International Journal of Machine Tools & Manufacture. ,vol. 38, pp. 1257- 1287 ,(1998) , 10.1016/S0890-6955(97)00137-5
J.-P. Kruth, M.C. Leu, T. Nakagawa, Progress in Additive Manufacturing and Rapid Prototyping CIRP Annals. ,vol. 47, pp. 525- 540 ,(1998) , 10.1016/S0007-8506(07)63240-5