Processing, microstructure and ablation behavior of C/SiC–Ti3SiC2 composites fabricated by liquid silicon infiltration
作者： Xiaomeng Fan , Xiaowei Yin , Lei Wang , Laifei Cheng , Litong Zhang
DOI: 10.1016/J.CORSCI.2013.04.029
关键词: Slurry 、 Porosity 、 Composite material 、 Infiltration (hydrology) 、 Corrosion 、 Materials science 、 Chemical vapor infiltration 、 Microstructure 、 Ablation 、 Layer (electronics)
摘要: In order to improve the ablation resistance of C/SiC composites, Ti3SiC2 was in situ formed composites by a joint process slurry infiltration and liquid silicon (LSI). Both mass rate linear decrease with introduction matrix. Compared low level porosity existence protective oxide layer lead better C/SiC–Ti3SiC2 composites.
elsevier.com
sci-hub.se 参考文章(37)
Charles B Spencer, Jose M Córdoba, Nicholas H Obando, Miladin Radovic, Magnus Odén, Lars Hultman, Michel W Barsoum, None, The Reactivity of Ti2AlC and Ti3SiC2 with SiC Fibers and Powders up to Temperatures of 1550°C Journal of the American Ceramic Society. ,vol. 94, pp. 1737- 1743 ,(2011) , 10.1111/J.1551-2916.2010.04332.X
Xiaowei Yin, Nahum Travitzky, Reinhold Melcher, Peter Greil, Three-dimensional printing of TiAl3/Al2O3composites Zeitschrift für Metallkunde. ,vol. 97, pp. 492- 498 ,(2006) , 10.3139/146.101263
Wei Sun, Xiang Xiong, Bai-yun Huang, Guo-dong Li, Hong-bo Zhang, Zhao-ke Chen, Xiang-Lin Zheng, ZrC ablation protective coating for carbon/carbon composites Carbon. ,vol. 47, pp. 3368- 3371 ,(2009) , 10.1016/J.CARBON.2009.07.047
Michel W. Barsoum, The MN+1AXN phases: A new class of solids Progress in Solid State Chemistry. ,vol. 28, pp. 201- 281 ,(2000) , 10.1016/S0079-6786(00)00006-6
Ya-lei Wang, Xiang Xiong, Xue-jia Zhao, Guo-dong Li, Zhao-ke Chen, Wei Sun, Structural evolution and ablation mechanism of a hafnium carbide coating on a C/C composite in an oxyacetylene torch environment Corrosion Science. ,vol. 61, pp. 156- 161 ,(2012) , 10.1016/J.CORSCI.2012.04.033
Dan Fang, Zhaofeng Chen, Yingdong Song, Zhigang Sun, Morphology and microstructure of 2.5 dimension C/SiC composites ablated by oxyacetylene torch Ceramics International. ,vol. 35, pp. 1249- 1253 ,(2009) , 10.1016/J.CERAMINT.2008.06.008
Marianne J.H. Balat, Determination of the active-to-passive transition in the oxidation of silicon carbide in standard and microwave-excited air Journal of The European Ceramic Society. ,vol. 16, pp. 55- 62 ,(1996) , 10.1016/0955-2219(95)00104-2
Zhimei Sun, Yanchun Zhou, Meishuan Li, Oxidation behaviour of Ti3SiC2-based ceramic at 900–1300°C in air Corrosion Science. ,vol. 43, pp. 1095- 1109 ,(2001) , 10.1016/S0010-938X(00)00142-6
Hitoshi Sasaki, Eiji Tokizaki, Xin Ming Huang, Kazutaka Terashima, Shigeyuki Kimura, Temperature Dependence of the Viscosity of Molten Silicon Measured by the Oscillating Cup Method Japanese Journal of Applied Physics. ,vol. 34, pp. 3432- 3436 ,(1995) , 10.1143/JJAP.34.3432
Ken-ichi Katsumata, Yoshikazu Kameshima, Kiyoshi Okada, Atsuo Yasumori, Preparation of phase-separated textures and crystalline phases from two-liquid immiscible melts in the TiO2-SiO2 system Materials Research Bulletin. ,vol. 39, pp. 1131- 1139 ,(2004) , 10.1016/J.MATERRESBULL.2004.02.011