Failure mode and effect analysis for photovoltaic systems
作者： Alessandra Colli
DOI: 10.1016/J.RSER.2015.05.056
关键词: Open source 、 Research center 、 Reliability engineering 、 Component (UML) 、 Photovoltaic system 、 Solar energy 、 Reliability (statistics) 、 Engineering 、 Failure mode and effects analysis 、 Systems engineering 、 Ranking
摘要: … The RPN simplifies the computation of the criticality number adopted in the failure mode effect and criticality analysis (FMECA) by requiring only the probability of failure (occurrence) …
sci-hub.se 参考文章(12)
Ernest Justus Henley, Hiromitsu Kumamoto, Probabilistic Risk Assessment and Management for Engineers and Scientists ,(1996)
Mahmood Shafiee, Fateme Dinmohammadi, An FMEA-Based Risk Assessment Approach for Wind Turbine Systems: A Comparative Study of Onshore and Offshore Energies. ,vol. 7, pp. 619- 642 ,(2014) , 10.3390/EN7020619
Jack Flicker, Robert Kaplar, Matthew Marinella, Jennifer Granata, PV inverter performance and reliability: What is the role of the bus capacitor? photovoltaic specialists conference. pp. 1- 3 ,(2012) , 10.1109/PVSC-VOL2.2012.6656709
A. Mariajayaprakash, T. Senthilvelan, Failure detection and optimization of sugar mill boiler using FMEA and Taguchi method Engineering Failure Analysis. ,vol. 30, pp. 17- 26 ,(2013) , 10.1016/J.ENGFAILANAL.2012.12.010
H. Arabian-Hoseynabadi, H. Oraee, P.J. Tavner, Failure Modes and Effects Analysis (FMEA) for wind turbines. International Journal of Electrical Power & Energy Systems. ,vol. 32, pp. 817- 824 ,(2010) , 10.1016/J.IJEPES.2010.01.019
Alessandra Colli, Extending performance and evaluating risks of PV systems failure using a fault tree and event tree approach: Analysis of the possible application photovoltaic specialists conference. pp. 002922- 002926 ,(2012) , 10.1109/PVSC.2012.6318198
Improving the reliability of electronic paper display using FMEA and Taguchi methods: A case study Microelectronics Reliability. ,vol. 54, pp. 1369- 1377 ,(2014) , 10.1016/J.MICROREL.2014.02.015
Alessandra Colli, Royce Francis, Information-based reliability weighting for failure mode prioritization in photovoltaic (PV) module design ,(2014)
Ale Ben, Colli Alessandra, Serbanescu Dan, PRA-Type Study Adapted to the Multi-crystalline Silicon Photovoltaic Cells Manufacture Process CRC Press Taylor & Francis Group. ,(2008)
Anastasios Golnas, PV System Reliability: An Operator's Perspective photovoltaic specialists conference. ,vol. 3, pp. 416- 421 ,(2013) , 10.1109/JPHOTOV.2012.2215015