Electrochemical and XPS studies of Ni-based metallic glasses in boiling nitric acid solutions

作者: Chunling Qin , Katsuhiko Asami , Hisamichi Kimura , Wei Zhang , Akihisa Inoue

DOI: 10.1016/J.ELECTACTA.2008.09.048

关键词: ElectrochemistryIonX-ray photoelectron spectroscopyNitric acidInorganic chemistryAmorphous metalCorrosionMaterials scienceBoilingQualitative inorganic analysis

摘要: This work systematically reports the electrochemical properties and surface characteristics of Ni-based metallic glasses in boiling nitric acid solutions. The Ni-based glassy alloys demonstrate high corrosion resistance in boiling 6N HNO3 solutions with and without Cr6+ ions, which may be of great potential for nuclear fuel reprocessing applications. X-ray photoelectron spectroscopy analysis reveals that the high corrosion resistance of the alloys is due to the formation of the passive film composed exclusively of Nb5+ and Ta5+ cations …

参考文章(15)
Shujie Pang, Tao Zhang, Katsuhiko Asami, Akihisa Inoue, Effects of Chromium on the Glass Formation and Corrosion Behavior of Bulk Glassy Fe-Cr-Mo-C-B Alloys Materials Transactions. ,vol. 43, pp. 2137- 2142 ,(2002) , 10.2320/MATERTRANS.43.2137
K. Asami, K. Hashimoto, The X-ray photo-electron spectra ofseveral oxides of iron and chromium Corrosion Science. ,vol. 17, pp. 559- 570 ,(1977) , 10.1016/S0010-938X(77)80002-4
A. Ravi Shankar, R.K. Dayal, R. Balasubramaniam, V.R. Raju, R. Mythili, S. Saroja, M. Vijayalakshmi, V.S. Raghunathan, Effect of heat treatment on the corrosion behaviour of Ti-5Ta-1.8Nb alloy in boiling concentrated nitric acid Journal of Nuclear Materials. ,vol. 372, pp. 277- 284 ,(2008) , 10.1016/J.JNUCMAT.2007.03.216
J.H. Kim, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami, K. Hashimoto, The corrosion behavior of sputter-deposited amorphous CrNb and CrTa alloys in 12 M HCl solution Corrosion Science. ,vol. 34, pp. 1947- 1955 ,(1993) , 10.1016/0010-938X(93)90052-I
Katsuhiko Asami, Koji Hashimoto, An XPS study of the surfaces on Fe-Cr, Fe-Co and Fe-Ni alloys after mechanical polishing Corrosion Science. ,vol. 24, pp. 83- 97 ,(1984) , 10.1016/0010-938X(84)90039-8
H. Habazaki, T. Sato, A. Kawashima, K. Asami, K. Hashimoto, Preparation of corrosion-resistant amorphous Ni–Cr–P–B bulk alloys containing molybdenum and tantalum Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 304, pp. 696- 700 ,(2001) , 10.1016/S0921-5093(00)01571-9
H Katagiri, S Meguro, M Yamasaki, H Habazaki, T Sato, A Kawashima, K Asami, K Hashimoto, Synergistic effect of three corrosion-resistant elements on corrosion resistance in concentrated hydrochloric acid Corrosion Science. ,vol. 43, pp. 171- 182 ,(2001) , 10.1016/S0010-938X(00)00067-6
J.H. Kim, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami, K. Hashimoto, An XPS study of the corrosion behavior of sputter-deposited amorphous Cr-Nb and Cr-Ta alloys in 12 M HCl solution Corrosion Science. ,vol. 36, pp. 511- 523 ,(1994) , 10.1016/0010-938X(94)90040-X
Akihisa Inoue, Wei Zhang, Tao Zhang, Thermal Stability and Mechanical Strength of Bulk Glassy Ni-Nb-Ti-Zr Alloys Materials Transactions. ,vol. 43, pp. 1952- 1956 ,(2002) , 10.2320/MATERTRANS.43.1952