Deformation Behavior of Semi-solid Forged A356–5TiB 2 Nano-In Situ Composites
作者： Sahini Deepak Kumar , Ananya Chatttee , Sanjay Kumar Jha , Niranjan Kumar Singh , Animesh Mandal
DOI: 10.1007/978-981-13-6412-9_7
关键词:
摘要: The research work investigates the application of semi-solid metal processing (SSMP) to predict deformation behavior A356–5TiB2 nano-in situ composites. forging in composites was carried out three steps. In first step, cooling slope (CS) casting setup developed generate non-dendritic feedstock for subsequent thixoforging. second differential thermal analysis used estimate temperature range order achieve partial remelting temperatures and solid fraction profiles final thixoforged with different % reductions ranging from 30 50%. It is noted that 40% attained ultimate tensile strength (UTS) 318 MPa, peak aged condition which about 110.6% compared gravity-cast alloy. This attributed due presence nano-TiB2 particles forged composite, clearly indicates influence on properties
springer.com
sci-hub.se 参考文章(14)
S. Tahamtan, M.A. Golozar, F. Karimzadeh, B. Niroumand, Microstructure and tensile properties of thixoformed A356 alloy Materials Characterization. ,vol. 59, pp. 223- 228 ,(2008) , 10.1016/J.MATCHAR.2006.12.010
Toshio Haga, Shinsuke Suzuki, Casting of aluminum alloy ingots for thixoforming using a cooling slope Journal of Materials Processing Technology. ,vol. 118, pp. 169- 172 ,(2001) , 10.1016/S0924-0136(01)00888-3
S. Deepak Kumar, A. Mandal, M. Chakraborty, On the age hardening behavior of thixoformed A356–5TiB2 in-situ composite Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 636, pp. 254- 262 ,(2015) , 10.1016/J.MSEA.2015.03.076
H.V. Atkinson, D. Liu, Microstructural coarsening of semi-solid aluminium alloys Materials Science and Engineering: A. ,vol. 496, pp. 439- 446 ,(2008) , 10.1016/J.MSEA.2008.06.013
Z. Fan, Semisolid metal processing International Materials Reviews. ,vol. 47, pp. 49- 85 ,(2002) , 10.1179/095066001225001076
A. Dodangeh, M. Kazeminezhad, H. Aashuri, Severe plastic deformation of rheoforged aluminum alloy A356 Materials Science and Engineering: A. ,vol. 558, pp. 371- 376 ,(2012) , 10.1016/J.MSEA.2012.08.014
A. Fadavi Boostani, S. Tahamtan, Effect of a novel thixoforming process on the microstructure and fracture behavior of A356 aluminum alloy Materials & Design. ,vol. 31, pp. 3769- 3776 ,(2010) , 10.1016/J.MATDES.2010.03.019
S. Deepak kumar, Pandu R. Vundavilli, Sisir Mantry, A. Mandal, M. Chakraborty, A Taguchi Optimization of Cooling Slope Casting Process Parameters for Production of Semi-solid A356 Alloy and A356-5TiB2 in-situ Composite Feedstock Procedia Materials Science. ,vol. 5, pp. 232- 241 ,(2014) , 10.1016/J.MSPRO.2014.07.262
M. K. Surappa, Aluminium matrix composites: Challenges and opportunities Sadhana-academy Proceedings in Engineering Sciences. ,vol. 28, pp. 319- 334 ,(2003) , 10.1007/BF02717141
D.G. Mallapur, K. Rajendra Udupa, S.A. Kori, Studies on the influence of grain refining and modification on microstructure and mechanical properties of forged A356 alloy Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 528, pp. 4747- 4752 ,(2011) , 10.1016/J.MSEA.2011.02.086