Complex modification of hypereutectic Al-Si alloy by a new Al-Y-P master alloy
作者： Min Zuo , Degang Zhao , Zhenqing Wang , Haoran Geng
DOI: 10.1007/S12540-015-4535-2
关键词:
摘要: In this article, a novel Al-6Y-2P master alloy with cubic YP particles was successfully synthesized and its complex modification performance on Al-18Si has also been investigated. With the doping of La Ce, (YxLa1-x)P (YxCe1-x)P still exhibit morphologies in three dimensional spaces (3-D space). The excellent can be obtained addition alloy. Under optimized conditions, i.e. melting temperature 780 °C, level 1.5 wt% holding time 30–60 min, tensile strength Brinell hardness alloys significantly increased by 16.8% 17.1%, respectively. It is proposed that Si atoms melt could promote structure evolution to AlP release Y, which would reason for composite developed
springer.com
harvard.edu
sci-hub.se 参考文章(27)
Joonyeon Chang, Inge Moon, Chongsool Choi, Refinement of Cast Microstructure of Hypereutectic Al-Si Alloys Through the Addition of Rare Earth Metals Journal of Materials Science. ,vol. 33, pp. 5015- 5023 ,(1998) , 10.1023/A:1004463125340
C.L. Xu, H.Y. Wang, Y.F. Yang, Hong-Ying Wang, Q.C. Jiang, Effect of La2O3 in the Al–P–Ti–TiC–La2O3 modifier on primary silicon in hypereutectic Al–Si alloys Journal of Alloys and Compounds. ,vol. 421, pp. 128- 132 ,(2006) , 10.1016/J.JALLCOM.2005.11.034
Hongseok Choi, Xiaochun Li, Refinement of primary Si and modification of eutectic Si for enhanced ductility of hypereutectic Al-20Si-4.5Cu alloy with addition of Al2O3 nanoparticles Journal of Materials Science. ,vol. 47, pp. 3096- 3102 ,(2012) , 10.1007/S10853-011-6143-Y
Zhi-ying Ouyang, Xie-min Mao, Mei Hong, Multiplex modification with rare earth elements and P for hypereutectic Al-Si alloys Journal of Shanghai University (english Edition). ,vol. 11, pp. 400- 402 ,(2007) , 10.1007/S11741-007-0416-1
F.C. Robles Hernández, J.H. Sokolowski, Comparison among chemical and electromagnetic stirring and vibration melt treatments for Al–Si hypereutectic alloys Journal of Alloys and Compounds. ,vol. 426, pp. 205- 212 ,(2006) , 10.1016/J.JALLCOM.2006.09.039
Zheng Liu, Jixing Lin, Qingxiu Jing, Effect of mixed rare earth oxides and CaCO3 modification on the microstructure of an in-situ Mg2Si/Al-Si composite Rare Metals. ,vol. 28, pp. 169- 174 ,(2009) , 10.1007/S12598-009-0034-2
W. J. Kyffin, W. M. Rainforth, H. Jones, Effect of phosphorus additions on the spacing between primary silicon particles in a Bridgman solidified hypereutectic Al-Si alloy Journal of Materials Science. ,vol. 36, pp. 2667- 2672 ,(2001) , 10.1023/A:1017904627733
Gencaga Purcek, Onur Saray, Oktay Kul, None, Microstructural evolution and mechanical properties of severely deformed Al-12Si casting alloy by equal-channel angular extrusion Metals and Materials International. ,vol. 16, pp. 145- 154 ,(2010) , 10.1007/S12540-010-0145-1
K. Nogita, A. Knuutinen, S.D. McDonald, A.K. Dahle, Mechanisms of eutectic solidification in Al–Si alloys modified with Ba, Ca, Y and Yb Journal of Light Metals. ,vol. 1, pp. 219- 228 ,(2001) , 10.1016/S1471-5317(02)00005-6
Zunjie Wei, Bao Li, Hongwei Wang, Jinchuan Jie, Effects of yttrium and heat treatment on the microstructure and tensile properties of Al–7.5Si–0.5Mg alloy Materials & Design. ,vol. 32, pp. 1617- 1622 ,(2011) , 10.1016/J.MATDES.2010.08.040