Secondary recrystallization of pure molybdenum wires

作者: Y. Ohba

DOI: 10.1016/0001-6160(86)90020-9

关键词:

摘要: Abstract The secondary recrystallization of drawn pure Mo wires has been studied; a particular attention paid on the effect temperature gradients in annealing process. recrystallized grains being very elongated along wire axis have obtained by moderate gradient furnace at about 2000°C. Orientations are mainly 〈023〉 or 〈135〉, while 〈011〉 oriented less frequently observed. In contrast, primary texture consists main component and 〈023〉-〈012〉 sub-component; many large grain sizes. observed discrepancy orientation between is explained terms difference boundary mobilities which depend character boundaries.

参考文章(8)
S. Mishra, C. Därmann, K. Lücke, On the development of the goss texture in iron-3% silicon Acta Metallurgica. ,vol. 32, pp. 2185- 2201 ,(1984) , 10.1016/0001-6160(84)90161-5
H Yoshida, B Liebmann, K Lücke, Orientation of recrystallized grains in strained aluminum single crystals Acta Metallurgica. ,vol. 7, pp. 51- 56 ,(1959) , 10.1016/0001-6160(59)90167-1
N. C. Pease, D. W. Jones, M. H. L. Wise, W. B. Hutchinson, SEM study of origin of Goss texture in Fe-3.25Si Metal science. ,vol. 15, pp. 203- 209 ,(1981) , 10.1179/030634581790426642
G.D Rieck, Growth and preferred orientations of crystals in tungsten wires Acta Metallurgica. ,vol. 6, pp. 360- 366 ,(1958) , 10.1016/0001-6160(58)90073-7
R Viswanathan, C.L Bauer, Kinetics of grain boundary migration in copper bicrystals with [001] rotation axes☆ Acta Metallurgica. ,vol. 21, pp. 1099- 1109 ,(1973) , 10.1016/0001-6160(73)90026-6
M Hillert, On the theory of normal and abnormal grain growth Acta Metallurgica. ,vol. 13, pp. 227- 238 ,(1965) , 10.1016/0001-6160(65)90200-2
D Eylon, A Rosen, S Niedzwiedz, Recrystallization of aluminium single crystals after point deformation Acta Metallurgica. ,vol. 17, pp. 1013- 1019 ,(1969) , 10.1016/0001-6160(69)90047-9
Hiroshi Yamamoto, The Effects of Recrystallization on Mechanical Properties of Doped Tungsten Wires Journal of The Japan Institute of Metals. ,vol. 37, pp. 1- 8 ,(1973) , 10.2320/JINSTMET1952.37.1_1