Droplet Breakup Theory as a Method to Predict the Processing Conditions of Polymer Blends
作者： V. N. Hoang
关键词:
摘要: Sumary: The droplet breakup theory has been investigated in predicting processing conditions of polymer blends. A ternary blend polystyrene/styrene-butadiene rubber/natural rubber (PS/SBR/NR) was used with a constant content every component [PS/SBR/NR 80/(30/70) wt.%] while changing mixing temperature, time and rotor speed. experimental design applied to optimize where izod impact tensile strength were the targets. from calculation: 190 °C, 56.5 rpm, 3.47 ÷ 5.47 min. Suitable blending resulting experiments were: 60 rpm, 5.44 min.
sci-hub.se 参考文章(14)
I. Luzinov, C. Pagnoulle, R. Jérôme, Dependence of phase morphology and mechanical properties of PS/SBR/PE ternary blends on composition: transition from core-shell to triple-phase continuity structures Polymer. ,vol. 41, pp. 3381- 3389 ,(2000) , 10.1016/S0032-3861(99)00514-5
I Luzinov, K Xi, C Pagnoulle, G Huynh-Ba, R Jérôme, Composition effect on the core–shell morphology and mechanical properties of ternary polystyrene/styrene–butadiene rubber/polyethylene blends Polymer. ,vol. 40, pp. 2511- 2520 ,(1999) , 10.1016/S0032-3861(98)00468-6
CZ Chuai, Kristoffer Almdal, Ib Johannsen, Jørgen Lyngaae-Jørgensen, Morphology Evolution of Polycarbonate-Polystyrene Blends During Compounding Polymer. ,vol. 42, pp. 8217- 8223 ,(2001) , 10.1016/S0032-3861(01)00309-3
Marcus Heindl, Maria-Kristin Sommer, Helmut M�nstedt, Morphology development in polystyrene/polyethylene blends during uniaxial elongational flow Rheologica Acta. ,vol. 44, pp. 55- 70 ,(2004) , 10.1007/S00397-004-0372-9
L. A. Utracki, Z. H. Shi, Development of polymer blend morphology during compounding in a twin-screw extruder. Part I: Droplet dispersion and coalescence—a review Polymer Engineering and Science. ,vol. 32, pp. 1824- 1833 ,(1992) , 10.1002/PEN.760322405
Susan Joseph, Sabu Thomas, Morphology, morphology development and mechanical properties of polystyrene/polybutadiene blends European Polymer Journal. ,vol. 39, pp. 115- 125 ,(2003) , 10.1016/S0014-3057(02)00180-5
V. Bordereau, M. Carrega, Z. H. Shi, L. A. Utracki, P. Sammut, Development of polymer blend morphology during compounding in a twin-screw extruder. Part III: Experimental procedure and preliminary results Polymer Engineering and Science. ,vol. 32, pp. 1846- 1856 ,(1992) , 10.1002/PEN.760322407
K Wilczyński, A Tyszkiewicz, Z Szymaniak, Modeling for morphology development during single-screw extrusion of LDPE/PS blend Journal of Materials Processing Technology. ,vol. 109, pp. 320- 323 ,(2001) , 10.1016/S0924-0136(00)00820-7
Igor Luzinov, Christophe Pagnoulle, Robert Jérôme, Ternary polymer blend with core–shell dispersed phases: effect of the core-forming polymer on phase morphology and mechanical properties Polymer. ,vol. 41, pp. 7099- 7109 ,(2000) , 10.1016/S0032-3861(00)00057-4
D. Bourry, B.D. Favis, Morphology development in a polyethylene/polystyrene binary blend during twin-screw extrusion Polymer. ,vol. 39, pp. 1851- 1856 ,(1998) , 10.1016/S0032-3861(97)00397-2