Morphology, morphology development and mechanical properties of polystyrene/polybutadiene blends
作者： Susan Joseph , Sabu Thomas
DOI: 10.1016/S0014-3057(02)00180-5
关键词:
摘要: Abstract Polystyrene/polybutadiene (PS/PB) blends with different plastic/rubber ratios were prepared by melt mixing. A detailed investigation on phase morphology development of 30/70 wt.% PS/PB as a function processing conditions was quantitatively analyzed. Morphology is developed at the initial stages Suitable blending resulting in optimum obtained 180 °C, 60 rpm and 8 min mixing time. Phase morphologies also studied composition. Mechanical properties measured. Attempts made to correlate properties. Parallel–Voids model has been applied characterize these blends.
elsevier.com
sci-hub.se 参考文章(42)
Anil K. Bhowmick, Howard L. Stephens, Handbook of elastomers : new developments and technology M. Dekker. ,(1988)
H. F. Mark, Jacqueline I. Kroschwitz, Encyclopedia of polymer science and engineering Wiley. ,(1985)
Handbook of Elastomers CRC Press. ,(2000) , 10.1201/9781482270365
Andrzej Galeski, Marian Kryszewski, Ezio Martuscelli, Polymer blends : processing, morphology, and properties Plenum Press. ,(1980)
L. A. Utracki, Two-Phase Polymer Systems ,(1991)
Robert F. Landel, Lawrence E. Nielsen, Mechanical Properties of Polymers and Composites ,(1993)
L. Kowalski, J. Duszczyk, L. Katgerman, Thermal conductivity of metal powder-polymer feedstock for powder injection moulding Journal of Materials Science. ,vol. 34, pp. 1- 5 ,(1999) , 10.1023/A:1004424401427
Snooppy George, Reethamma Joseph, Sabu Thomas, KT Varughese, Blends of isotactic polypropylene and nitrile rubber: morphology, mechanical properties and compatibilization Polymer. ,vol. 36, pp. 4405- 4416 ,(1995) , 10.1016/0032-3861(95)96846-Z
T. Johnson, Sabu Thomas, Natural rubber/epoxidised natural rubber-25 blends: morphology, transport phenomena and mechanical properties Journal of Materials Science. ,vol. 34, pp. 3221- 3239 ,(1999) , 10.1023/A:1004638024590
C. Radhesh Kumar, K. E. George, Sabu Thomas, Morphology and mechanical properties of thermoplastic elastomers from nylon‐nitrile rubber blends Journal of Applied Polymer Science. ,vol. 61, pp. 2383- 2396 ,(1996) , 10.1002/(SICI)1097-4628(19960926)61:13<2383::AID-APP18>3.0.CO;2-5