Optimization on wear performance of UHMWPE composites using response surface methodology
作者： Boon Peng Chang , Hazizan Md Akil , Ramdziah Bt Nasir , Abbas Khan
DOI: 10.1016/J.TRIBOINT.2015.03.028
关键词:
摘要: Abstract This study examined the wear characteristics of ultra-high molecular weight polyethylene (UHMWPE) reinforced with talc particles. Analysis variance (ANOVA) was used to construct empirical models show connection between control factors (filler loading, load and sliding speed) responses (wear rate average coefficient friction (COF)) UHMWPE. Response Surface Methodology (RSM) employed project optimization variables in order reduce It discovered that COF UHMWPE could be minimized by inclusion talc. The SEM analyses worn surfaces transfer films indicated degree on surface reduced.
elsevier.com
sci-hub.se 参考文章(39)
Li Chang, Zhong Zhang, Lin Ye, Klaus Friedrich, Tribological properties of epoxy nanocomposites: III. Characteristics of transfer films Wear. ,vol. 262, pp. 699- 706 ,(2007) , 10.1016/J.WEAR.2006.08.002
J. Menczel, J. Varga, Influence of nucleating agents on crystallization of polypropylene Journal of Thermal Analysis and Calorimetry. ,vol. 28, pp. 161- 174 ,(1983) , 10.1007/BF02105288
S. Bahadur, C. Sunkara, Effect of transfer film structure, composition and bonding on the tribological behavior of polyphenylene sulfide filled with nano particles of TiO2, ZnO, CuO and SiC Wear. ,vol. 258, pp. 1411- 1421 ,(2005) , 10.1016/J.WEAR.2004.08.009
Avishek Majumder, Arun Goyal, Enhanced production of exocellular glucansucrase from Leuconostoc dextranicum NRRL B-1146 using response surface method. Bioresource Technology. ,vol. 99, pp. 3685- 3691 ,(2008) , 10.1016/J.BIORTECH.2007.07.027
D. Battegazzore, S. Bocchini, A. Frache, Crystallization kinetics of poly(lactic acid)-talc composites Express Polymer Letters. ,vol. 5, pp. 849- 858 ,(2011) , 10.3144/EXPRESSPOLYMLETT.2011.84
A. Shakoor, N.L. Thomas, Talc as a nucleating agent and reinforcing filler in poly(lactic acid) composites Polymer Engineering and Science. ,vol. 54, pp. 64- 70 ,(2014) , 10.1002/PEN.23543
Géraldine Theiler, Thomas Gradt, Friction and wear of PEEK composites in vacuum environment Wear. ,vol. 269, pp. 278- 284 ,(2010) , 10.1016/J.WEAR.2010.04.007
Christian J. Schwartz, Shyam Bahadur, Surya K. Mallapragada, Effect of crosslinking and Pt–Zr quasicrystal fillers on the mechanical properties and wear resistance of UHMWPE for use in artificial joints Wear. ,vol. 263, pp. 1072- 1080 ,(2007) , 10.1016/J.WEAR.2006.10.023
B. Ben Difallah, M. Kharrat, M. Dammak, G. Monteil, Mechanical and tribological response of ABS polymer matrix filled with graphite powder Materials & Design. ,vol. 34, pp. 782- 787 ,(2012) , 10.1016/J.MATDES.2011.07.001
Douwe Homminga, Bart Goderis, Igor Dolbnya, Harry Reynaers, Gabriel Groeninckx, Crystallization behavior of polymer/montmorillonite nanocomposites. Part I. Intercalated poly(ethylene oxide)/montmorillonite nanocomposites Polymer. ,vol. 47, pp. 1620- 1629 ,(2005) , 10.1016/J.POLYMER.2005.12.080