Constant Rate Thermal Analysis (CRTA) as a Tool for the Synthesis of Materials with Controlled Texture and Structure

作者: M. D. Alcalá , F. J. Gotor , L. A. Pérez-Maqueda , C. Real , M. J. Dianez

DOI: 10.1023/A:1010187313720

关键词:

摘要: Some examples of the use CRTA method for synthesis materials with controlled texture and structure are given. BaTiO 3 has been obtained from thermal decomposition Barium Titanyl Oxalate (BTO) Citrate (BTC) by controlling reaction temperature in such a way that partial pressure gases generated was maintained constant at value close to 10 -2 mbar. It shown this allows getting crystal sizes considerably lower than those decomposing same precursors conventional methods. This small lead stabilisation metastable cubic phase regards tetragonal phase. also control CO carbothermal reduction silica tailoring composition silicon nitride as final product.

参考文章(20)
J. M. Criado, F. J. Gotor, C. Real, F. Jimenez, S. Ramos, J. Del Cerro, Application of the constant rate thermal analysis technique to the microstructure control of BaTiO3 yielded from coprecipitated oxalate Ferroelectrics. ,vol. 115, pp. 43- 48 ,(1991) , 10.1080/00150199108014476
R. M. LOBO, MOHALLEM NDS., R. L. MOREIRA, Grain‐Size Effects on Diffuse Phase Transitions of Sol‐Gel Prepared Barium Titanate Ceramics Journal of the American Ceramic Society. ,vol. 78, pp. 1343- 1346 ,(1995) , 10.1111/J.1151-2916.1995.TB08492.X
Michael J. Hoffmann, Alwin Nagel, Peter Greil, Gunter Petzow, Slip Casting of SiC‐Whisker‐Reinforced Si3N4 Journal of the American Ceramic Society. ,vol. 72, pp. 765- 769 ,(1989) , 10.1111/J.1151-2916.1989.TB06214.X
F ROUQUEROL, Y LAUREIRO, J ROUQUEROL, Influence of water vapour pressure on the thermal dehydration of lithium sulphate monohydrate Solid State Ionics. pp. 363- 366 ,(1993) , 10.1016/0167-2738(93)90130-U
M. Klee, R. Eusemann, R. Waser, W. Brand, H. van Hal, Processing and electrical properties of Pb (ZrxTi1−x)O3 (x=0.2–0.75) films: Comparison of metallo‐organic decomposition and sol‐gel processes Journal of Applied Physics. ,vol. 72, pp. 1566- 1576 ,(1992) , 10.1063/1.351726