Sliding wear behaviour of Zr-ion-implanted D3 tool steel
作者： N. Saklakoglu , I.E. Saklakoglu , V. Ceyhun , O.R. Monteiro , I.G. Brown
DOI: 10.1016/J.TRIBOINT.2006.07.004
关键词:
摘要: Abstract The wear and friction characteristics of zirconium-ion-implanted AISI D3 tool steel have been investigated using pin-on-disc methods. Ion implantation was carried out a vacuum-arc-based ion implanter to form multicharged zirconium beams at mean energy 130 keV, the doses were approximately 3.6×1016, 5×1016 1×1017 ions cm−2. It found that Zr decreased both coefficient friction. beneficial effects in terms associated Auger electron spectroscopy, Rutherford backscattering spectroscopy scanning microscopy microprobe analyses are described.
elsevier.com
sci-hub.se 参考文章(28)
Brown Akbas, Oztarhan, Monteiro, None, Investigation on the tribology of Zr ion implanted tool steel Wear. ,vol. 252, pp. 540- 545 ,(2002) , 10.1016/S0043-1648(01)00894-8
I.I Garbar, Gradation of oxidational wear of metals Tribology International. ,vol. 35, pp. 749- 755 ,(2002) , 10.1016/S0301-679X(02)00032-4
K.P. Purushotham, Liam P. Ward, Narelle Brack, Paul J. Pigram, Peter Evans, Hans Noorman, Rafael R. Manory, Tribological studies of Zr-implanted PVD TiN coatings deposited on stainless steel substrates Wear. ,vol. 254, pp. 589- 596 ,(2003) , 10.1016/S0043-1648(03)00187-X
Ian G. Brown, James E. Galvin, Robert A. MacGill, High current ion source Applied Physics Letters. ,vol. 47, pp. 358- 360 ,(1989) , 10.1063/1.96163
Yu P Sharkeev, EV Kozlov, None, The long-range effect in ion implanted metallic materials: dislocation structures, properties, stresses, mechanisms Surface & Coatings Technology. ,vol. 158, pp. 219- 224 ,(2002) , 10.1016/S0257-8972(02)00212-8
I. G. Brown, M. R. Dickinson, J. E. Galvin, X. Godechot, R. A. MacGill, Some novel surface modification applications of a new kind of high current metal ion implantation facility Journal of Materials Engineering. ,vol. 13, pp. 217- 228 ,(1991) , 10.1007/BF02834181
R. Ramesh, R. Gnanamoorthy, Effect of post oxidation on the fretting wear behavior of liquid nitrided En 24 steel Surface & Coatings Technology. ,vol. 200, pp. 3926- 3932 ,(2006) , 10.1016/J.SURFCOAT.2005.02.115
I. G. Brown, J. E. Galvin, B. F. Gavin, R. A. MacGill, Metal vapor vacuum arc ion source Review of Scientific Instruments. ,vol. 57, pp. 1069- 1084 ,(1986) , 10.1063/1.1138660
W.L. Lin, X.J. Ding, H.X. Zhang, J.M. Sang, J. Xu, Z.Y. Wang, Metal vapour vacuum arc source ion implantation as a surface treatment technique for industrial tool bits Surface & Coatings Technology. ,vol. 51, pp. 534- 539 ,(1992) , 10.1016/0257-8972(92)90294-K
Ian G. Brown, Vacuum Arc Ion Sources Review of Scientific Instruments. ,vol. 65, pp. 3061- 3081 ,(1994) , 10.1063/1.1144756