Mechanical properties of polymer-optical fibres
作者： E. Arrospide , I. Bikandi , I. García , G. Durana , G. Aldabaldetreku
DOI: 10.1016/B978-0-08-100039-7.00007-5
关键词:
摘要: Abstract This chapter describes the mechanical properties of POFs, such as Young’s modulus, strain, stress, or strength, which result relevant in performance well aging and fabrication new POF designs. All these physical vary drastically depending on designed type, going from conventional step-index POFs (SI-POF) to hollow-core solid-core microstructured (mPOF), multicore (MCPOF) dye-doped POFs. The begins with a description key parameters that characterize Afterwards, review available different geometries, sizes materials is performed. Finally, models for thermoplastic polymers are summarized. use will be helpful design process optimized types.
sci-hub.se 参考文章(25)
Mohammad A. Al-Fawzan, King Abdulaziz, Methods for Estimating the Parameters of the Weibull Distribution ,(2000)
Robert J. Young, A. J. Kinloch, Fracture Behaviour of Polymers ,(2013)
Hassan Behery, Effect of mechanical and physical properties on fabric hand CRC Press. ,(2005) , 10.1201/9781439823767
Waloddi Weibull, A statistical theory of the strength of materials ,(1939)
Wole Soboyejo, Mechanical Properties of Engineered Materials ,(2002)
Iker García, Joseba Zubia, Gaizka Durana, Gotzon Aldabaldetreku, María Illarramendi, Joel Villatoro, Optical Fiber Sensors for Aircraft Structural Health Monitoring Sensors. ,vol. 15, pp. 15494- 15519 ,(2015) , 10.3390/S150715494
Ian M. Ward, D.W. Hadley, An introduction to the mechanical properties of solid polymers ,(1993)
William F. Hosford, Mechanical Behavior of Materials ,(2004)
L. Catherine Brinson, Hal F. Brinson, Polymer Engineering Science and Viscoelasticity: An Introduction ,(2015)
Physical properties of polymers handbook Physical Properties of Polymers Handbook. ,(2007) , 10.1007/978-0-387-69002-5