Energy consumption of a pilot-scale spray dryer.
作者： H. E. Al-Mansour , B. H. Al-Busairi , C. G. J. Baker
DOI: 10.1080/07373937.2011.595563
关键词:
摘要: Factors affecting the energy consumption of a pilot-scale spray dryer have been studied. The feedstock employed was instant coffee solution (50–150 gl−1). Its feed rate ranged from 0.83 to 1.9 mls−1 and inlet air temperature 473–533 K. specific E s (3,000–5,500 kJkg−1) decreased with increasing difference across increased solids concentration. Values obtained were consistent Baker McKenzie's[ 10 ] adiabatic model. thermal loss factor η evaporation rate. Attempts correlate product moisture content operating variables met limited success.
cabdirect.org
sci-hub.se 参考文章(13)
J. Rojas, Green Coffee Storage Coffee: Growing, Processing, Sustainable Production: A Guidebook for Growers, Processors, Traders, and Researchers. pp. 731- 750 ,(2008) , 10.1002/9783527619627.CH26
Radha Charan, Suresh Prasad, None, Energy conservation in milk spray-drying plant Journal of Food Engineering. ,vol. 18, pp. 247- 258 ,(1993) , 10.1016/0260-8774(93)90089-3
C. G. J. Baker, H. M. S. Lababidi, An Improved Model of Plug-Flow Fluidized Bed Dryers with an Emphasis on Energy Conservation Drying Technology. ,vol. 28, pp. 730- 741 ,(2010) , 10.1080/07373931003799368
N. V. Menshutina, M. G. Gordienko, A. A. Voynovskiy, T. Kudra, Dynamic Analysis of Drying Energy Consumption Drying Technology. ,vol. 22, pp. 2281- 2290 ,(2004) , 10.1081/DRT-200039996
T.A.G. Langrish, Multi-scale mathematical modelling of spray dryers Journal of Food Engineering. ,vol. 93, pp. 218- 228 ,(2009) , 10.1016/J.JFOODENG.2009.01.019
T. Kudra, Energy Aspects in Drying Drying Technology. ,vol. 22, pp. 917- 932 ,(2004) , 10.1081/DRT-120038572
C. G. J. Baker, Energy Efficient Dryer Operation—An Update on Developments Drying Technology. ,vol. 23, pp. 2071- 2087 ,(2005) , 10.1080/07373930500210556
C.G.J. Baker, A.R. Khan, Y.I. Ali, K. Damyar, Simulation of plug flow fluidized bed dryers Chemical Engineering and Processing. ,vol. 45, pp. 641- 651 ,(2006) , 10.1016/J.CEP.2006.01.008
A.C. Mercer, Improving the energy efficiency of industrial spray dryers Journal of Heat Recovery Systems. ,vol. 6, pp. 3- 10 ,(1986) , 10.1016/0198-7593(86)90166-9
T. Kudra, R. Platon, P. Navarri, Excel-Based Tool to Analyze the Energy Performance of Convective Dryers∗ Drying Technology. ,vol. 27, pp. 1302- 1308 ,(2009) , 10.1080/07373930903383687