Interfacial microstructure and mechanical properties of TiAl and C/SiC joint brazed with TiH2–Ni–B brazing powder
作者： Zhenwen Yang , LiXia Zhang , Xiaoyu Tian , Yuzhang Liu , Peng He
DOI: 10.1016/J.MATCHAR.2013.02.010
关键词:
摘要: … adjacent to C/SiC composite, the TiB-whisker reinforced central zone, … Ti–Cu composite foils were used to join C/SiC composite … which could withstand high temperature environments. …
sci-hub.se 参考文章(27)
J. Cao, P. He, M. Wang, Mechanical milling of Ti–Ni–Si filler metal for brazing TiAl intermetallics Intermetallics. ,vol. 19, pp. 855- 859 ,(2011) , 10.1016/J.INTERMET.2011.01.017
X. Yue, P. He, J.C. Feng, J.H. Zhang, F.Q. Zhu, Microstructure and interfacial reactions of vacuum brazing titanium alloy to stainless steel using an AgCuTi filler metal Materials Characterization. ,vol. 59, pp. 1721- 1727 ,(2008) , 10.1016/J.MATCHAR.2008.03.014
Guobiao Lin, Jihua Huang, Hong Zhang, Joints of carbon fiber-reinforced SiC composites to Ti-alloy brazed by Ag–Cu–Ti short carbon fibers Journal of Materials Processing Technology. ,vol. 189, pp. 256- 261 ,(2007) , 10.1016/J.JMATPROTEC.2007.01.031
S.J. Lee, S.K. Wu, R.Y. Lin, Infrared joining of TiAl intermetallics using Ti-15Cu-15Ni foil—II. The microstructural evolution at high temperature Acta Materialia. ,vol. 46, pp. 1297- 1305 ,(1998) , 10.1016/S1359-6454(97)00299-1
J XIONG, J LI, F ZHANG, W HUANG, Joining of 3D C/SiC composites to niobium alloy Scripta Materialia. ,vol. 55, pp. 151- 154 ,(2006) , 10.1016/J.SCRIPTAMAT.2006.03.050
I.C. Wallis, H.S. Ubhi, M.-P. Bacos, P. Josso, J. Lindqvist, D. Lundstrom, A. Wisbey, Brazed joints in γ TiAl sheet: microstructure and properties Intermetallics. ,vol. 12, pp. 303- 316 ,(2004) , 10.1016/J.INTERMET.2003.11.002
Zhenwen Yang, Peng He, Lixia Zhang, Jicai Feng, Microstructural evolution and mechanical properties of the joint of TiAl alloys and C/SiC composites vacuum brazed with Ag–Cu filler metal Materials Characterization. ,vol. 62, pp. 825- 832 ,(2011) , 10.1016/J.MATCHAR.2011.05.007
Peng He, Duo Liu, Erjing Shang, Ming Wang, Effect of mechanical milling on Ni–TiH2 powder alloy filler metal for brazing TiAl intermetallic alloy: The microstructure and joint's properties Materials Characterization. ,vol. 60, pp. 30- 35 ,(2009) , 10.1016/J.MATCHAR.2008.05.010
Y Z Liu, L X Zhang, C B Liu, Z W Yang, H W Li, J C Feng, Brazing C/SiC composites and Nb with TiNiNb active filler metal Science and Technology of Welding and Joining. ,vol. 16, pp. 193- 198 ,(2011) , 10.1179/1362171810Y.0000000021
Jin Hui Xiong, Ji Hua Huang, Hua Zhang, Xing Ke Zhao, Brazing of carbon fiber reinforced SiC composite and TC4 using Ag–Cu–Ti active brazing alloy Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 527, pp. 1096- 1101 ,(2010) , 10.1016/J.MSEA.2009.09.024