Effect of additives on hot deformation behavior of melt-spun Nd-Fe-Co-B magnets
作者： Y. Yoshida , N. Yoshikawa , T. Nishio , Y. Kasai , V. Panchanathan
DOI: 10.1063/1.349943
关键词:
摘要: The effect of various additives on hot workability was investigated for alloy systems (Nd13.6−xRx)(Fe77.6−yTyCo2.8)B6.0: R=Ce, Dy; x=0, 1, 2; T=Al, Si, V, Cu, Ga, Zr, Nb, Mo, Sn; y=0, 0.5, 1.0. A semiquantitative comparison the made by measuring crack opening displacement (CODmax) in test specimens deformed an open (unconstrained) configuration. Among additives, cerium and silicon improved while niobium tin severely deteriorated workability. remanence anisotropy ratio inversely related to CODmax. Detailed microstructural investigations were carried out with alloys which had only or study reason their behavior base alloy. added is lower melting temperature intergranular phase faster grain growth compared Tin addition prevented no endothermic peak a differe...
harvard.edu
scitation.org
aip.org 
sci-hub.se 参考文章(5)
N. Yoshikawa, Y. Kasai, T. Watanabe, S. Shibata, V. Panchanathan, J. J. Croat, Effect of additive elements on magnetic properties and irreversible loss of hot‐worked Nd‐Fe‐Co‐B magnets Journal of Applied Physics. ,vol. 69, pp. 6049- 6051 ,(1991) , 10.1063/1.347766
R. W. Lee, Hot‐pressed neodymium‐iron‐boron magnets Applied Physics Letters. ,vol. 46, pp. 790- 791 ,(1985) , 10.1063/1.95884
Y. Yoshida, Y. Kasai, T. Watanabe, S. Shibata, V. Panchanathan, J. J. Croat, Hot workability of melt-spun Nd-Fe-Co-B magnets Journal of Applied Physics. ,vol. 69, pp. 5841- 5843 ,(1991) , 10.1063/1.347844
J. J. Croat, J. F. Herbst, R. W. Lee, F. E. Pinkerton, Pr‐Fe and Nd‐Fe‐based materials: A new class of high‐performance permanent magnets (invited) Journal of Applied Physics. ,vol. 55, pp. 2078- 2082 ,(1984) , 10.1063/1.333571
Raja K. Mishra, Microstructure of hot‐pressed and die‐upset NdFeB magnets Journal of Applied Physics. ,vol. 62, pp. 967- 971 ,(1987) , 10.1063/1.339709