Magnetic microparticle-polydimethylsiloxane composite for reversible microchannel bonding
作者： Chia-Wen Tsao , Yueh-Pu Lee
DOI: 10.1080/14686996.2016.1140301
关键词:
摘要: AbstractIn this study, an iron oxide magnetic microparticles and poly(dimethylsiloxane) (MMPs-PDMS) composite material was employed to demonstrate a simple high-strength reversible bonding method. This paper presents the casting of opaque-view (where optical inspection through microchannels impossible) clear-view microchannel possible) MMPs-PDMS. The influence geometries on limited, which is similar standard PDMS casting. Clear-view performance highly associated with geometries. effects layout gap between cover layer micromold substrate were thoroughly investigated. Compared native strength 31 kPa, MMPs-PDMS experiments showed that thin film effectively reduced surface roughness enhanced magnetic...
harvard.edu
sci-hub.se 参考文章(32)
Holger Becker, Laurie E Locascio, Polymer microfluidic devices Talanta. ,vol. 56, pp. 267- 287 ,(2002) , 10.1016/S0039-9140(01)00594-X
Gina S. Fiorini, Daniel T. Chiu, Disposable microfluidic devices: fabrication, function, and application BioTechniques. ,vol. 38, pp. 429- 446 ,(2005) , 10.2144/05383RV02
M. Le Berre, C. Crozatier, G. Velve Casquillas, Y. Chen, Reversible assembling of microfluidic devices by aspiration Microelectronic Engineering. ,vol. 83, pp. 1284- 1287 ,(2006) , 10.1016/J.MEE.2006.01.257
C. Crozatier, M. Le Berre, Y. Chen, Multi-colour micro-contact printing based on microfluidic network inking Microelectronic Engineering. ,vol. 83, pp. 910- 913 ,(2006) , 10.1016/J.MEE.2006.01.015
Yolanda H. Tennico, Myra T. Koesdjojo, Saki Kondo, David T. Mandrell, Vincent T. Remcho, Surface modification-assisted bonding of polymer-based microfluidic devices Sensors and Actuators B-chemical. ,vol. 143, pp. 799- 804 ,(2010) , 10.1016/J.SNB.2009.10.001
Qiang Chen, Gang Li, Yuan Nie, Shuhuai Yao, Jianlong Zhao, Investigation and improvement of reversible microfluidic devices based on glass–PDMS–glass sandwich configuration Microfluidics and Nanofluidics. ,vol. 16, pp. 83- 90 ,(2014) , 10.1007/S10404-013-1222-9
Chia-Wen Tsao, Don L. DeVoe, Bonding of thermoplastic polymer microfluidics Microfluidics and Nanofluidics. ,vol. 6, pp. 1- 16 ,(2009) , 10.1007/S10404-008-0361-X
Laurie Brown, Terry Koerner, J. Hugh Horton, Richard D. Oleschuk, Fabrication and characterization of poly(methylmethacrylate) microfluidic devices bonded using surface modifications and solvents Lab on a Chip. ,vol. 6, pp. 66- 73 ,(2006) , 10.1039/B512179E
Marco Rasponi, Francesco Piraino, Nasser Sadr, Matteo Laganà, Alberto Redaelli, Matteo Moretti, Reliable magnetic reversible assembly of complex microfluidic devices: fabrication, characterization, and biological validation Microfluidics and Nanofluidics. ,vol. 10, pp. 1097- 1107 ,(2011) , 10.1007/S10404-010-0738-5
Cheng-Tai Chen, Yu-Chie Chen, Fe3O4/TiO2 Core/Shell Nanoparticles as Affinity Probes for the Analysis of Phosphopeptides Using TiO2 Surface-Assisted Laser Desorption/Ionization Mass Spectrometry Analytical Chemistry. ,vol. 77, pp. 5912- 5919 ,(2005) , 10.1021/AC050831T