The Effect of Alkalization and Fiber Loading on the Mechanical Properties of Bamboo Fiber Composites, Part 1: -Polyester Resin Matrix
作者： Mahuya Das , Debabrata Chakraborty
DOI: 10.1002/APP.29342
关键词:
摘要: Bamboo strips [10 cm × 1.5 (1−1.5) mm] were treated with caustic solutions for 1 h at different concentrations e.g., 0, 10, 15, 20, and 25%. reinforced polyester resin composites fabricated by hand-lay-up technique using both alkali-treated untreated bamboo strips, a room temperature curing system the resin. This study aims evaluation of influence concentration on mechanical properties constant 50% loading reinforcement. Maximum improvement in property was achieved possibly 20% strip reinforcements. Beyond 20%, there degradation all strength because failure reinforcements itself. The effect fiber variation upon also studied. It observed that superior obtained 60% filler loading. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci,
caluniv.ac.in参考文章(16)
Mahuya Das, Anindya Pal, Debabrata Chakraborty, Effects of mercerization of bamboo strips on mechanical properties of unidirectional bamboo–novolac composites Journal of Applied Polymer Science. ,vol. 100, pp. 238- 244 ,(2006) , 10.1002/APP.23028
Mahuya Das, Debabrata Chakraborty, Influence of Mercerization on the Dynamic Mechanical Properties of Bamboo, a Natural Lignocellulosic Composite Industrial & Engineering Chemistry Research. ,vol. 45, pp. 6489- 6492 ,(2006) , 10.1021/IE0603971
Jochen Gassan, Andrzej K. Bledzki, Possibilities for improving the mechanical properties of jute/epoxy composites by alkali treatment of fibres Composites Science and Technology. ,vol. 59, pp. 1303- 1309 ,(1999) , 10.1016/S0266-3538(98)00169-9
Abhijit P. Deshpande, M. Bhaskar Rao, C. Lakshmana Rao, Extraction of bamboo fibers and their use as reinforcement in polymeric composites Journal of Applied Polymer Science. ,vol. 76, pp. 83- 92 ,(2000) , 10.1002/(SICI)1097-4628(20000404)76:1<83::AID-APP11>3.0.CO;2-L
Sharifah H. Aziz, Martin P. Ansell, The effect of alkalization and fibre alignment on the mechanical and thermal properties of kenaf and hemp bast fibre composites: Part 1 – polyester resin matrix Composites Science and Technology. ,vol. 64, pp. 1219- 1230 ,(2004) , 10.1016/J.COMPSCITECH.2003.10.001
Mahuya Das, Debabrata Chakraborty, Role of mercerization of the bamboo strips on the impact properties and morphology of unidirectional bamboo strips–novolac composites Polymer Composites. ,vol. 28, pp. 57- 60 ,(2007) , 10.1002/PC.20292
D Ray, B.K Sarkar, A.K Rana, N.R Bose, The mechanical properties of vinylester resin matrix composites reinforced with alkali-treated jute fibres Composites Part A-applied Science and Manufacturing. ,vol. 32, pp. 119- 127 ,(2001) , 10.1016/S1359-835X(00)00101-9
Seema Jain, Rakesh Kumar, U. C. Jindal, Mechanical behaviour of bamboo and bamboo composite Journal of Materials Science. ,vol. 27, pp. 4598- 4604 ,(1992) , 10.1007/BF01165993
Shigeyasu Amada, Yoshinobu Ichikawa, Tamotsu Munekata, Yukito Nagase, Hiroyuki Shimizu, Fiber texture and mechanical graded structure of bamboo Composites Part B: Engineering. ,vol. 28, pp. 13- 20 ,(1997) , 10.1016/S1359-8368(96)00020-0
A. K. Ray, S. Mondal, S. K. Das, P. Ramachandrarao, Bamboo—A functionally graded composite-correlation between microstructure and mechanical strength Journal of Materials Science. ,vol. 40, pp. 5249- 5253 ,(2005) , 10.1007/S10853-005-4419-9