Micromachined gap waveguides for 100 GHz applications
作者： P. Enoksson , S. Haasl , S. Rahiminejad , A. U. Zaman , H. Raza
DOI:
关键词:
摘要: The present paper demonstrates groove gap waveguides at around 100 GHz, fabricated on Gold-plated micromachined silicon. Three different have been manufactured and measured: a resonator for determining Q-factor thereby attenuation, straight waveguide, waveguide with two 90 degree bends.
chalmers.se参考文章(9)
Elena Pucci, Ashraf Uz Zaman, Eva Rajo‐Iglesias, Per‐Simon Kildal, Ahmed Kishk, Study of Q-factors of ridge and groove gap waveguide resonators Iet Microwaves Antennas & Propagation. ,vol. 7, pp. 900- 908 ,(2013) , 10.1049/IET-MAP.2013.0081
Per-Simon Kildal, Three metamaterial-based gap waveguides between parallel metal plates for mm/submm waves european conference on antennas and propagation. pp. 17- 21 ,(2009)
Astrid Algaba Brazalez, Ashraf Uz Zaman, Per-Simon Kildal, Improved Microstrip Filters Using PMC Packaging by Lid of Nails IEEE Transactions on Components, Packaging and Manufacturing Technology. ,vol. 2, pp. 1075- 1084 ,(2012) , 10.1109/TCPMT.2012.2190931
Ashraf Uz Zaman, Mats Alexanderson, Tin Vukusic, Per-Simon Kildal, Gap Waveguide PMC Packaging for Improved Isolation of Circuit Components in High-Frequency Microwave Modules IEEE Transactions on Components, Packaging and Manufacturing Technology. ,vol. 4, pp. 16- 25 ,(2014) , 10.1109/TCPMT.2013.2271651
E. Rajo-Iglesias, P.-S. Kildal, Numerical studies of bandwidth of parallel-plate cut-off realised by a bed of nails, corrugations and mushroom-type electromagnetic bandgap for use in gap waveguides IET Microwaves, Antennas & Propagation. ,vol. 5, pp. 282- 289 ,(2011) , 10.1049/IET-MAP.2010.0073
S. Rahiminejad, A.U. Zaman, E. Pucci, H. Raza, V. Vassilev, S. Haasl, P. Lundgren, P.-S. Kildal, P. Enoksson, Micromachined ridge gap waveguide and resonator for millimeter-wave applications Sensors and Actuators A-physical. ,vol. 186, pp. 264- 269 ,(2012) , 10.1016/J.SNA.2012.02.036
E. Rajo-Iglesias, A.U. Zaman, P.-S. Kildal, Parallel Plate Cavity Mode Suppression in Microstrip Circuit Packages Using a Lid of Nails IEEE Microwave and Wireless Components Letters. ,vol. 20, pp. 31- 33 ,(2010) , 10.1109/LMWC.2009.2035960
P.-S. Kildal, E. Alfonso, A. Valero-Nogueira, E. Rajo-Iglesias, Local Metamaterial-Based Waveguides in Gaps Between Parallel Metal Plates IEEE Antennas and Wireless Propagation Letters. ,vol. 8, pp. 84- 87 ,(2009) , 10.1109/LAWP.2008.2011147
P.-S. Kildal, A.U. Zaman, E. Rajo-Iglesias, E. Alfonso, A. Valero-Nogueira, Design and experimental verification of ridge gap waveguide in bed of nails for parallel-plate mode suppression IET Microwaves, Antennas & Propagation. ,vol. 5, pp. 262- 270 ,(2011) , 10.1049/IET-MAP.2010.0089